Compare prices on a used Škoda Kodiaq clutch slave cylinder from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used clutch slave cylinder that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Only on manual gearbox variants — the Kodiaq has been offered with both manual and automatic (DSG) transmissions, and the clutch slave cylinder is a component that exists solely on the manual versions. If your Kodiaq has a DSG or automatic gearbox, it does not have a conventional clutch slave cylinder and you would need to look at the DSG mechatronics or valve body instead. Check your V5 or a VIN check to confirm your gearbox type before ordering any clutch hydraulics.
The Kodiaq was introduced in 2017 as the first generation, with a facelift arriving in 2021, so your two vehicles sit either side of a production boundary. Engine code is the primary fitment factor here — if both cars share the same engine code and manual gearbox, there is a reasonable chance of compatibility, but ancillary and mounting details can change across a facelift. Name your engine code to the breaker and ask them to confirm against your exact registration before purchasing.
Trim level — whether S, SE, SE L, Sportline, or vRS — does not affect clutch slave cylinder fitment; this is a mechanical component that follows the engine code and gearbox type, not the badge on the boot lid. The main thing to watch on a vRS is that it has its own specific engine codes (the 2.0 TSI petrol or 2.0 TDI diesel in performance tune), so make sure the engine codes match rather than assuming vRS-to-vRS is automatically correct. Trim differences you may notice on a used part are cosmetic things like colour or interior fittings, none of which are relevant here.
Fuel type itself is less critical than engine code, but petrol and diesel Kodiaqs use different engines with different bell housings and hydraulic layouts, so a slave cylinder from a 2.0 TDI is unlikely to be a straight swap onto a 2.0 TSI even if the gearbox type looks similar. Always lead with the full engine code — found on your V5 or a VIN decoder — when asking a breaker for a quote, as this tells them exactly which engine family and gearbox combination they need to match. Never rely on fuel type alone as a fitment guide.
The engine code matters significantly — Volkswagen Group uses several different 2.0 TDI variants (for example EA288 family engines with codes such as DFGA or DGTE) that can have differing clutch hydraulic arrangements even within what looks like the same engine family. A breaker will cross-reference your engine code against their donor vehicle to make sure the parts match properly, so always supply it when requesting a quote on Findapart. If you are unsure of your engine code, it is stamped on the block and also listed on your V5 logbook.
Because the Kodiaq shares its MQB platform with the Tiguan, Ateca, and several other VAG group models, there is genuine parts crossover across the range, and a slave cylinder from the same engine code and gearbox combination in a Tiguan or Ateca may well be identical. However, whether a specific part from a specific year donor car is a confirmed match depends on production run and any running changes, so confirm the engine code and gearbox code of the donor vehicle with the breaker before buying. This cross-platform search can be a useful way to widen your options and potentially reduce cost.