Need a used Škoda Citigo clutch slave cylinder? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two clutch slave cylinders are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Only manual-gearbox Citigos have a clutch slave cylinder — automatics (fitted with a single-clutch automated manual transmission on some variants) do not use one in the conventional sense. If your Citigo has a manual gearbox, it will have a clutch slave cylinder, typically a concentric unit located inside the bellhousing on the gearbox. If you are unsure which gearbox your car has, check your V5 or run a VIN check before ordering.
The Citigo ran as a single generation from 2011 through to around 2019 in the UK, with a mid-cycle refresh around 2016-2017, so a pre-facelift 2012 unit and a post-facelift 2018 unit are both within the same overall generation. In practice fitment often follows the engine code rather than the model year, and whether the slave cylinder changed across the facelift boundary is something you should confirm with the breaker against your registration and engine code. Supply your engine code (found on your V5 or a VIN check) to give the breaker the best chance of matching the correct unit.
Trim level does not affect which clutch slave cylinder was fitted — S, SE, and Edition are cosmetic and equipment distinctions, not mechanical ones. What matters is the engine code and whether the car has a manual gearbox, so focus on matching those details rather than the trim badge. Bear in mind a used part from a different trim car may arrive with surrounding ancillaries that look different cosmetically, but the cylinder itself should be what you need if the engine code matches.
The Citigo, VW Up, and SEAT Mii are closely related and share engines and gearboxes, so clutch slave cylinders from these sister cars are widely regarded as interchangeable where the engine code matches. However, you should confirm fitment with the breaker by providing your engine code and registration, as ancillary details or supplier variations can occasionally differ. A good breaker will cross-reference the part number to verify compatibility before supplying.
Yes — the engine code matters more than anything else for this part, because even within the 1.0 petrol family there were different engine codes used across the Citigo's production run, and the gearbox (and therefore the slave cylinder) can vary with them. The engine code is stamped on the block and also listed on your V5 or available via a VIN check. Always give the breaker your engine code alongside your registration to ensure you get the correct unit.
The Citigo was not offered with a diesel engine in the UK — it was a petrol-only model, so this situation would not arise. All Citigos sold in the UK used 1.0-litre petrol engines, meaning when searching for a used slave cylinder you are always matching within the petrol engine family and should focus on getting the correct engine code rather than worrying about fuel type.