Findapart

Škoda Felicia Clutch Slave Cylinder Replacement Parts

Compare prices on a used Škoda Felicia clutch slave cylinder from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Felicia clutch slave cylinder

No two clutch slave cylinders are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Felicia parts

Used clutch slave cylinder for other Škoda models

Fitment questions

Does a clutch slave cylinder from an earlier Škoda Felicia fit a later one?

The Škoda Felicia ran from 1994 to 2001 as a single generation, with a facelift arriving around 1998, and the clutch slave cylinder fitment is driven primarily by engine code rather than model year alone. Parts from either side of the 1998 facelift may well interchange, but whether a specific unit crosses that boundary safely is something you should confirm with the breaker quoting against your exact registration.

Does the Škoda Felicia actually have a clutch slave cylinder?

Yes, but only on manual gearbox variants — the clutch slave cylinder is the hydraulic component that actuates the clutch release bearing, and it exists wherever the Felicia was fitted with a hydraulic clutch system on a manual transmission. If your Felicia has a cable-operated clutch rather than a hydraulic one, there is no slave cylinder in the system, so confirm which setup your car has before searching for this part.

Which engine code should I give the breaker when looking for a Felicia clutch slave cylinder?

The engine code is the single most useful detail you can supply — it sits on your V5C or can be retrieved via a VIN check, and it tells the breaker far more than the badge or body style does. Common Felicia engine codes include the 1.3 AEX and 1.6 AEE petrol units alongside the 1.9 diesel SDI, and the slave cylinder specification can differ between these, so always lead with the code.

Does trim level affect which clutch slave cylinder I need for a Škoda Felicia?

No — trim level has no bearing on clutch slave cylinder fitment whatsoever. Whether your Felicia is a base LX, mid-spec GLX, or top-spec SLXi, the relevant factors are engine code, fuel type, and gearbox type, not the trim badge. You may receive a part pulled from a different trim car and that is perfectly fine mechanically.

Will a clutch slave cylinder from a Škoda Felicia fit a SEAT Ibiza or VW Polo of the same era?

The Felicia shares platform and engine family roots with several VAG-group models of the 1990s, so there is a reasonable chance of cross-compatibility on shared engine codes, but this is not guaranteed because mounting arrangements and cylinder dimensions can differ between applications. Give the breaker both the Felicia engine code and the donor vehicle's details and ask them to cross-reference before purchasing.

I have a 1999 Škoda Felicia — will a slave cylinder from a 1996 car fit it?

A 1996 car predates the 1998 facelift while your 1999 car postdates it, so you are looking at a part crossing a known production boundary. Engine code compatibility is the best guide here — if both cars share the same engine code and gearbox type, fitment is more likely, but you should confirm with the breaker against your registration before committing, as ancillary and mounting details can change mid-production.