Findapart

Škoda Fabia Brake Pedal Replacement Parts

Compare prices on a used Škoda Fabia brake pedal from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Fabia brake pedal

No two brake pedals are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Fabia parts

Used brake pedal for other Škoda models

Fitment questions

Does a brake pedal from an older Fabia fit a newer one – for example, will a Mk1 pedal fit a Mk2?

The Fabia has run across three main generations: Mk1 (1999–2007), Mk2 (2007–2014), and Mk3 (2015–2021), and the brake pedal assembly is unlikely to interchange across those generation boundaries due to changes in the pedal box, master cylinder interface, and bulkhead mountings. Within a single generation, pedals are far more likely to cross over, but you should always confirm the exact part against your registration with the breaker before buying.

Does engine size affect which brake pedal I need for my Škoda Fabia?

In most cases the brake pedal itself is common across engine sizes within a generation, as it connects to the master cylinder and servo rather than to the braking hardware at the wheel. That said, some larger or more powerful engine variants may have had different pedal box or servo setups, so it is worth telling the breaker your exact engine size and registration to be certain.

Will a brake pedal from a Fabia 1.2 fit my Fabia 1.4 of the same age?

If both cars are from the same generation – for example, both Mk2 models built between 2007 and 2014 – there is a reasonable chance the pedal is shared, as the pedal box design within a generation tends not to change with every engine variant. However, confirm the part number against your registration with the breaker, as subtle differences in the servo or master cylinder fit can affect compatibility.

Does the trim level matter – will a brake pedal from a Classic or Elegance fit my Ambiente or SE?

Trim level does not affect brake pedal fitment; the pedal is part of the mechanical running gear, not a cosmetic item, so a Classic, Ambiente, Elegance, or SE pedal from the same generation will be the same part. Focus instead on matching the generation and, where relevant, the engine variant, and check with the breaker against your registration to confirm.

I have a 2014 Fabia – is that Mk2 or Mk3, and does it change what brake pedal I need?

The Mk2 Fabia ran until around 2014 and the Mk3 launched in 2015, so a 2014 car is almost certainly a Mk2, but late production overlaps can occur, so check your V5C or ask the breaker to look up your registration to confirm which generation you actually have. Getting the generation right is the most important factor when sourcing a used brake pedal, as parts are unlikely to interchange across the Mk2-to-Mk3 boundary.

Is a brake pedal from a Fabia facelift model compatible with a pre-facelift car from the same generation?

The Mk2 Fabia received a facelift in 2010, and while the brake pedal and pedal box are fundamentally mechanical components that may well be unchanged, mid-generation running gear updates are an area where you should confirm compatibility with the breaker against both registrations rather than assume the parts are interchangeable.