Findapart

Cheap Škoda Enyaq Brake Pedal

Compare prices on a used Škoda Enyaq brake pedal from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Enyaq brake pedal

No two brake pedals are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Enyaq parts

Used brake pedal for other Škoda models

Fitment questions

Does the Škoda Enyaq actually have a brake pedal – I've heard EVs don't?

Yes, the Enyaq absolutely has a conventional brake pedal – while it uses regenerative braking to slow the car and recover energy, the hydraulic brake system with a physical brake pedal is still present on every variant, including all battery sizes and both rear-wheel-drive and four-wheel-drive models. The pedal itself is a real mechanical and hydraulic component that can wear or get damaged and does come up as a used part from breakers. You are thinking of the fact that you use the brake pedal less often in an EV, but it is definitely there.

Will a brake pedal from a 2021 or 2022 Enyaq fit my 2023 or 2024 car – is there a facelift to worry about?

The Enyaq launched in the UK in 2021 and received a mid-life refresh around 2023 that brought some exterior and interior changes, but the fundamental brake pedal assembly sits within the pedal box and is unlikely to be affected by those cosmetic updates. That said, whether the exact pedal, pivot pin, and bracket arrangement interchange cleanly across that 2023 boundary is something you should confirm with the breaker against your specific registration, as subtle running-gear revisions can catch you out. Give the breaker your VIN or reg so they can cross-reference the part number from the car they are dismantling.

Does it matter whether the Enyaq has the smaller 60 or 85 battery versus the larger iV 80 or iV 80x when sourcing a brake pedal?

Battery size and motor output can influence the wider brake system specification – heavier or more powerful variants may carry uprated components – but the brake pedal itself is the foot-operated lever in the cabin and is generally consistent across the range rather than varying by battery pack. It is still worth telling the breaker which exact variant you have (for example, Enyaq 60, 80, or 80x four-wheel-drive) so they can match the part number precisely, because subtle differences in pedal feel or bracket design could exist. Never assume a part fits solely on the basis of model name without the breaker checking against your registration.

Does the trim level matter – will a brake pedal from a Enyaq Suite or Sportline fit my Loft or iV 80 Founders Edition?

Trim level does not affect brake pedal fitment – the pedal assembly is determined by the vehicle's mechanical specification, not by whether the car is a Suite, Loft, Sportline, or a special edition such as the Founders Edition. You may find cosmetic differences in the pedal cap or pad finish (rubber versus alloy-look), so check with the breaker whether their pedal includes the decorative cover or just the pedal arm, to make sure it looks right in your car. The underlying fitment question is about the model year and drivetrain, not the trim badge.

Is the brake pedal the same on a rear-wheel-drive Enyaq as on the four-wheel-drive Enyaq iV 80x?

The 4WD Enyaq iV 80x adds a front motor and this changes the braking system's characteristics, which could in principle affect brake pedal specification compared with the rear-wheel-drive versions. In practice the foot-pedal lever itself may well be shared, but this is exactly the kind of detail you should not assume – ask the breaker to confirm the part number from a 4WD car matches yours if that is what you drive. Always supply your registration or VIN to the breaker so they can verify rather than guess.

Can I use a brake pedal from a left-hand-drive European Enyaq on my UK right-hand-drive car?

No – the pedal box assembly is handed to the steering configuration, so a left-hand-drive pedal from a continental European car will not fit a UK right-hand-drive Enyaq. Always make sure any part you source comes from a right-hand-drive UK or Irish market car, and confirm this with the breaker before buying. Getting this wrong means the part will simply not locate correctly in your car.