Cheap Peugeot 108 Axle
Compare prices on a used Peugeot 108 axle from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Peugeot 108 axle
No two axles are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's front or rear
- State if it's 2WD or 4WD
Other used Peugeot 108 parts
- Used Peugeot 108 Subframe
- Used Peugeot 108 Steering Rack
- Used Peugeot 108 Wishbone
- Used Peugeot 108 Front Cross Member
- Used Peugeot 108 Seat Belt
- Used Peugeot 108 Wing Mirror
- Used Peugeot 108 Wheel Hub
- Used Peugeot 108 Front Panel
- Used Peugeot 108 Rear Light
- Used Peugeot 108 Alternator
- Used Peugeot 108 Turbo
- Used Peugeot 108 Rear Bumper
Used axle for other Peugeot models
Fitment questions
What years did the Peugeot 108 run, and does that affect which axle I need?
The Peugeot 108 ran from 2014 to 2022 as a single generation with no full model change during that period, though it received a facelift in 2018. For the axle, the generation is the primary fitment consideration, so a 108 built anywhere across 2014–2022 is broadly the right starting point when sourcing a used unit. Confirm the exact year of your donor car with the breaker against your registration to be sure.
Will a pre-facelift Peugeot 108 axle (2014–2017) fit a post-facelift model (2018–2022)?
The 2018 facelift is the key boundary to be aware of here: while the 108 remained on the same platform throughout, whether axle components cross that facelift line without modification is not something we can confirm as fact. Name the boundary to your breaker — pre-facelift 2014–2017 versus post-facelift 2018–2022 — and ask them to check your specific registration before buying.
Does engine size matter when buying a used axle for a Peugeot 108?
Yes, engine size can affect axle and brake specifications because larger or more powerful engines sometimes carry uprated running gear. The 108 was available with different engines including 1.0-litre and 1.2-litre units, so always tell the breaker your exact engine size alongside your registration when requesting a quote.
Does it matter whether my Peugeot 108 is an Active, Allure, or Collection trim when sourcing an axle?
Trim level — Active, Allure, or Collection — does not affect axle fitment on the Peugeot 108, as running gear on this model is not determined by trim grade. You may find cosmetic differences between donor and recipient cars such as different wheel sizes or caliper finishes, but the structural axle components are trim-independent. Focus on generation and engine size rather than trim when giving details to the breaker.
Does the axle from a Peugeot 108 fit a Toyota Aygo or Citroën C1 of the same era?
The Peugeot 108, Toyota Aygo, and Citroën C1 were all built on a shared platform and produced together at the same factory, so there is a reasonable degree of parts commonality. However, whether a specific axle assembly transfers directly between brands and years without any differences is something you should confirm with the breaker against both registrations rather than assume. A good breaker will be able to cross-reference the part numbers for you.
Is there any difference between NS and OS axle components on the Peugeot 108 that I need to specify?
Side does matter for certain axle components such as driveshafts and wishbones, which are handed NS (nearside, left) and OS (offside, right), so always specify which side you need when contacting a breaker. The axle beam itself on this type of small car is typically a torsion beam running across both sides as a single assembly, but confirm with the breaker exactly which component you need and for which side before ordering.