Need a used Nissan Navara washer pump? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used washer pump varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Nissan Navara D40 ran from 2005 to 2015, so both a 2007 and a 2010 unit fall within the same generation, which is a good starting point for compatibility. That said, whether the pump connector, mounting and hose fittings are identical across the full D40 production run is worth confirming with the breaker against your exact registration before you buy. Never assume fitment without that check.
The NP300 (also called the D23) replaced the D40 in the UK around 2016 and is a different generation with a redesigned bodyshell, so parts are not expected to carry over directly between the two. A washer pump from a D40 is unlikely to be a straightforward swap onto an NP300 due to differences in wiring connectors and reservoir design. Confirm with the breaker using both registrations to be sure.
Trim level does not affect washer pump fitment on the Navara — the pump itself is the same mechanical component regardless of whether the vehicle is a Visia, Acenta, SE or Tekna. What you should check is whether the pump is for the front screen, rear screen, or headlamp washers if your vehicle has that feature, as these are separate units. Stick to matching the generation and confirming the connector type with the breaker.
Engine variant does not affect washer pump fitment — the pump sits on the washer reservoir and is not tied to the engine specification. What matters is the generation of your Navara (D40 or NP300) and which pump position you need, such as front, rear or headlamp washer if applicable. Confirm the part against your registration with the breaker to be certain.
Yes, a 2014 Navara is a late D40, as that generation ran from 2005 until around 2015 when the NP300 took over. Pumps from earlier D40 models are a reasonable candidate, but whether there were any running changes to the reservoir or connector during the D40's long production life is something to confirm with the breaker against both registrations. Don't take fitment as guaranteed without that check.
Both a 2017 and a 2019 Navara fall within the NP300 (D23) generation, which improves the chances of the pump being compatible. However, confirm with the breaker that there were no mid-life changes to the reservoir or pump connector during the NP300's production run, especially if a facelift was carried out in your market. Providing both registrations to the breaker is the safest way to verify before purchasing.