Nissan Micra Wheel Trims Replacement Parts

Wheel trims on the Micra are generation-specific, and the main generations to know are the K11 (1992–2002), K12 (2003–2010), and K13 (2010–2017). Trims from one generation will almost certainly not clip onto the wheels of another, as the wheel diameter and centre-hole profile changed between generations. If you're shopping near a generation boundary — for example a 2010 car that could be either a late K12 or an early K13 — confirm the exact generation with the breaker against your registration before ordering.

Wheel trims are a cosmetic cover and are not affected by engine size on the Micra; they fit over the wheel itself, not any part of the running gear. The key factor is the wheel diameter your car was built with, which is tied more closely to trim level and model year than to engine choice. Check your existing trims or your tyre sidewall for the wheel size (typically 13-inch on K11, 14 or 15-inch on K12 and K13) and match that with the breaker.

Trim level does not affect whether a wheel trim physically fits — what matters is that both cars share the same wheel diameter, which on the K13 generation (2010–2017) is typically 14 or 15 inches depending on specification. An Acenta and a Visia on the same generation and wheel size will take the same trim, though the trims themselves may look different in colour or design between grades. If you're not fussed about an exact colour match, any same-diameter trim from the same generation should clip on correctly, but confirm the specific wheel size with the breaker against your registration.

No — the number of doors has no bearing on wheel trim fitment whatsoever, as the wheels and hubs are identical regardless of body style. The generation and wheel diameter are all that matters for a wheel trim to clip on correctly. Focus your search on matching the generation (K11, K12, or K13) and wheel size rather than worrying about body style.

A 2009 car is a K12 (2003–2010) and a 2011 car is a K13 (2010–2017), so these are different generations with different wheel specifications. Wheel trims are shaped to the specific wheel profile and diameter of each generation, so K13 trims are very unlikely to clip correctly onto K12 wheels. Stick to K12-sourced trims for your 2009 car, and confirm compatibility with the breaker using your registration to be safe.

You can absolutely buy a single used trim from a breaker if you only need to replace one — they are sold individually as often as in sets. The important thing is that it matches your wheel diameter and, ideally, comes from the same generation of Micra so the clip pattern and centre profile are the same. If an exact match for your trim style isn't critical, any same-size trim from the correct generation should fit physically, though there may be a cosmetic difference in design or finish compared with your remaining original trims.