Second Hand Nissan Cabstar Glove Box

The Nissan Cabstar is a light commercial truck (cab-over van/pickup), and in most cab configurations it does not feature a traditional passenger-side glove box as you would find in a car or van — the dashboard layout is typically a simple commercial-spec unit with open shelving, a centre cubby, or door pockets rather than a lockable glove box. If you are looking for a storage compartment, you may actually want an overhead shelf unit, a centre console storage tray, or a door pocket — confirm exactly what storage fitment your cab has with the breaker against your registration. It is worth describing the specific compartment or its location to the breaker so they can match the correct part to your vehicle.

Depending on the generation and cab trim of your Cabstar, available dashboard storage parts can include centre console trays, overhead storage shelves, and door-mounted pockets rather than a conventional glove box. The Cabstar has been produced across several generations including the F22 series (roughly 1992–2006) and the later F24 series (approximately 2006 onwards), and interior trim layouts differ between these generations, so a part from one generation is unlikely to suit the other. Confirm with the breaker which specific storage component you need and give them your registration so they can source the correct item for your cab variant.

The F22 and F24 generations have different cab interiors, so dashboard and storage components from the earlier F22 (up to around 2006) are generally not interchangeable with those from the F24 (from around 2006 onwards). Even within a generation there can be differences between single cab and crew cab configurations, and between trim levels, which can affect how interior panels and storage units fit. Always confirm cross-generation fitment with the breaker against your registration before purchasing.

Yes — single cab and crew cab Cabstars can have noticeably different interior layouts, and higher-spec trim levels may include additional or differently styled storage solutions compared to basic fleet-spec cabs. Because the Cabstar is a commercial vehicle, trim names are not as standardised as on passenger cars, so the best approach is to describe your cab type and spec to the breaker clearly. Providing your registration will help the breaker confirm the exact interior configuration your vehicle was built with.

Give the breaker your registration number, the cab configuration (single cab, double cab, or crew cab), and a clear description of where the storage compartment is located — for example, above the windscreen, in the centre of the dashboard, or in the door. Because the Cabstar does not typically have a conventional glove box, being specific about what you are replacing will help the breaker pull the right part from a matching donor vehicle. Photos of your existing fitment or the gap where the part should be are also very helpful for commercial vehicle interiors where variations are common.