Second Hand Nissan Vanette Glove Box

The Nissan Vanette is a van and minibus-derived vehicle, and depending on the variant and market specification, a dedicated glove box may not have been fitted at all — many Vanette loadspace and basic commercial variants use a simple open dashboard shelf or cubby rather than a latched glove box unit. Some higher-specification passenger or people-carrier variants may have had a more enclosed storage compartment, but provision varied considerably by specification and market. Before searching for this part, confirm with your breaker whether your specific vehicle was actually fitted with a glove box rather than an open shelf, quoting your registration.

The Nissan Vanette went through distinct generations during its production run, and dashboard and interior architecture changed between them, meaning parts from different generations are very unlikely to be interchangeable. Even within a generation, facelift revisions sometimes altered trim panels and storage components. Confirm the exact generation and production date of both the donor and recipient vehicle with your breaker before purchasing.

Trim level can affect interior components, including storage units, as higher-specification variants sometimes received different dashboard finishes or additional fitments compared to base commercial versions. If your Vanette has a glove box, match the trim level of the donor vehicle as closely as possible to avoid differences in finish, colour, or latch type. Ask your breaker to confirm the trim specification of the part they are supplying against your registration.

Engine type does not affect glove box fitment — the storage unit is an interior trim component and is the same regardless of whether the vehicle has a petrol or diesel engine. Focus instead on matching the generation and interior trim specification, as these are the factors that determine whether a part will fit and look correct in your vehicle.

A glove box is generally a straightforward trim component to swap, typically involving removing a few fixings and disconnecting any light wiring if fitted, so a competent DIYer can usually manage it. However, if your dashboard area is near airbag components, take care not to disturb the SRS system during removal or refitting. If you are at all unsure about working near airbag components, have the job done by a professional.

Interior trim colour and finish on the Vanette varied by specification, production period, and market, so always ask your breaker to confirm the colour code or describe the finish before you commit. Photographs from the breaker of the actual part are strongly recommended, especially for older vehicles where fading and wear may mean exact colour matching is difficult. Your breaker can check compatibility against your registration to give you the best chance of a close match.