Cheap Mercedes-Benz Sprinter Bonnet Latch

Yes, all Mercedes-Benz Sprinter vans have a conventional front-hinged bonnet with a bonnet latch and release mechanism, regardless of engine, wheelbase, or roof height. The latch is a real and commonly replaced part on this model, typically consisting of the catch mounted on the body and the striker on the bonnet itself.

The Sprinter runs across three main generations: the first-generation W903 ran from 1995 to 2006, the second-generation W906 ran from 2006 to 2018, and the third-generation W907/W910 launched in 2018 and is current. Generation is the most important factor for bonnet latch fitment, as the front-end structure and bonnet design differ significantly between these platforms, so always match to your generation first.

Both a 2014 and a 2010 Sprinter are W906 second-generation models, so they share the same platform and front-end structure across different wheelbases and roof heights. However, the W906 received a facelift around 2013 which brought changes to the front end including the grille and bumper area, and it is worth confirming with the breaker whether the latch assembly is identical across that facelift boundary before purchasing.

The W906 facelift in 2013 updated the front-end styling, and while the bonnet latch itself may or may not have changed, this is exactly the kind of detail you should confirm with the breaker by giving them your registration number so they can verify against the correct part. Do not assume the pre- and post-facelift latch are interchangeable without that check.

The 314, 316, and 319 designations refer to payload and engine variants, not to different body or front-end structures, so they all use the same bonnet latch within the same generation. Trim or specification level does not affect bonnet latch fitment on the Sprinter - what matters is the generation and facelift period, not the engine size or load rating.

No - short wheelbase, long wheelbase, extra-long wheelbase, low roof, medium roof, and high roof Sprinters all share the same front-end panel design within a generation, so these factors make no difference to bonnet latch fitment. Simply confirm your generation (W903, W906, or W907/W910) and your model year with the breaker, and they will be able to match the correct part to your van.