Findapart

Used Mercedes-Benz 190E Anti Roll Bar

Get quotes for a used or replacement Mercedes-Benz 190E anti roll bar. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Mercedes-Benz 190E anti roll bar

Used anti roll bars vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Mercedes-Benz 190E parts

Used anti roll bar for other Mercedes-Benz models

Fitment questions

Will an anti-roll bar from an earlier 190E fit my later one?

The Mercedes-Benz 190E (W201) was produced as a single generation from 1982 to 1993, with a facelift in 1988 that updated the interior and trim but did not significantly alter the suspension architecture. Front and rear anti-roll bars were fitted to all 190E variants, so bars from across the full 1982–1993 production run are generally considered compatible, but whether a specific bar crosses the 1988 facelift boundary without issue is worth confirming with the breaker against your registration before you buy.

Does the engine size affect which anti-roll bar I need on a 190E?

The 190E was offered with a range of four-cylinder and six-cylinder engines, including the 1.8, 2.0, 2.3, and 2.6, and Mercedes did vary suspension tuning with engine size and weight across the range. A 2.6-litre car carries more weight over the front axle than a 1.8, so the anti-roll bar dimensions can differ between engine variants. Always tell the breaker your exact engine size so they can match the bar correctly to your car.

Does the trim level matter when buying a used 190E anti-roll bar?

Trim level alone does not affect which anti-roll bar your 190E needs — the key factors are the engine size and whether it is front or rear. That said, if you are looking at a 190E 2.3-16 or 2.5-16 (the Cosworth-engined variants), these used different suspension components to the standard 190E range, so confirm with the breaker whether the bar came from a standard or 16-valve car.

Is there a separate front and rear anti-roll bar on the 190E, and do I need to specify?

Yes, the W201 190E has both a front and a rear anti-roll bar as standard fitment, and they are different parts that are not interchangeable with each other. When contacting a breaker, make sure you specify clearly whether you need the front or rear bar, along with your engine variant and model year, to avoid being sent the wrong one.

I've seen anti-roll bars listed from a 190D — will one of those fit my 190E?

The W201 platform underpins both the 190E petrol and 190D diesel models, and the suspension layout is shared, so there is a reasonable chance of compatibility where the engine weights are similar. However, because bar sizing can vary with engine weight and specification, you should confirm with the breaker that the bar from a specific 190D variant is a direct match for your 190E's engine size before purchasing.