Mazda RX-8 Door Lock Mechanism Replacement Parts
Get quotes for a used or replacement Mazda RX-8 door lock mechanism. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Mazda RX-8 door lock mechanism
No two door lock mechanisms are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- Specify front/rear and left/right
Other used Mazda RX-8 parts
- Used Mazda RX-8 Door Handle
- Used Mazda RX-8 Window Motor
- Used Mazda RX-8 Window Winder Motor
- Used Mazda RX-8 Wing Mirror
- Used Mazda RX-8 Slam Panel
- Used Mazda RX-8 Bonnet Strut
- Used Mazda RX-8 Wheel Hub
- Used Mazda RX-8 Brake Discs
- Used Mazda RX-8 Washer Motor
- Used Mazda RX-8 Clutch Master Cylinder
- Used Mazda RX-8 Clutch
- Used Mazda RX-8 Side Skirt
Used door lock mechanism for other Mazda models
Fitment questions
Will a door lock mechanism from an early RX-8 (2003-2008) fit a facelift RX-8 (2008-2012)?
The RX-8 ran from 2003 to 2012, with a facelift arriving in 2008 that brought exterior and interior changes. The door lock mechanism sits within the door frame, and whether pre-facelift and post-facelift units interchange is not guaranteed across that 2008 boundary. Confirm the exact part against your registration with the breaker before buying.
Does the side (NS or OS) matter when buying a used RX-8 door lock mechanism?
Yes, side is critical — the nearside (NS, passenger/left) and offside (OS, driver/right) mechanisms are mirror images of each other and are not interchangeable. Always tell the breaker which side you need, using NS for the passenger side and OS for the driver side as is standard UK convention. Ordering the wrong side means the part simply will not fit.
The RX-8 has rear suicide doors — does that affect which lock mechanism I need?
The RX-8 is a four-door car with rear-hinged back doors, so there are actually four distinct lock mechanisms: OS front, NS front, OS rear, and NS rear. Make sure you tell the breaker both the side (NS or OS) and whether you need a front or rear door mechanism, as these are different parts. Getting all three details right — model year, side, and front or rear — gives you the best chance of a correct match.
Does the trim level affect which door lock mechanism I need on an RX-8?
The RX-8 was sold in trim levels including Standard, R3, and PZ in the UK market, but trim level does not affect door lock mechanism fitment — the mechanism is determined by the door position and vehicle generation, not the specification level. You may find cosmetic differences in door furniture between trims, but the lock mechanism itself should be interchangeable across trims within the same generation and door position. Confirm against your registration with the breaker to be sure.
Can I use a door lock mechanism from any 2003-2007 RX-8 on my 2006 car?
In principle, RX-8s built within the same pre-facelift generation (2003 to 2008) are the most likely candidates to share door lock mechanisms, but minor production changes can occur within a generation that affect fitment. Provide the breaker with your full registration so they can check the exact part number against the donor vehicle rather than relying on year alone. Never assume a part fits purely on the basis of overlapping years.
Does the engine variant matter — for example, does a high-power 231bhp RX-8 use a different door lock mechanism than a lower-power version?
Engine output does not affect door lock mechanism fitment — this is a purely structural door component with no connection to the drivetrain or power output. Whether your RX-8 is a 189bhp or 231bhp variant makes no difference here; what matters is the generation, the door (front or rear), and the side (NS or OS). Focus your search on those three details and supply your registration to the breaker for confirmation.