Used Mazda MX-5 Door Lock Mechanism
Get quotes for a used or replacement Mazda MX-5 door lock mechanism. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Mazda MX-5 door lock mechanism
Used door lock mechanisms vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- Specify front/rear and left/right
Other used Mazda MX-5 parts
- Used Mazda MX-5 Door Handle
- Used Mazda MX-5 Window Winder Motor
- Used Mazda MX-5 Door
- Used Mazda MX-5 Window Switch
- Used Mazda MX-5 Headlight
- Used Mazda MX-5 Wishbone
- Used Mazda MX-5 Throttle Body
- Used Mazda MX-5 Seat Belt Pretensioner
- Used Mazda MX-5 Front Bumper
- Used Mazda MX-5 Tyre
- Used Mazda MX-5 Handbrake Cable
- Used Mazda MX-5 Wing
Used door lock mechanism for other Mazda models
Fitment questions
Does a door lock mechanism from an earlier MX-5 fit my newer one?
The MX-5 has run across four distinct generations: NA (Mk1, 1989–1998), NB (Mk2, 1998–2005), NC (Mk3, 2005–2015), and ND (Mk4, 2015–present), and door lock mechanisms are generation-specific because the door shell and internal geometry differ between each. A part from one generation will not transfer to another, so always match the generation to your car's registration. If you're unsure which generation you have, check your V5C or ask the breaker to confirm against your reg.
Does it matter which side I order — can I use any MX-5 door lock mechanism?
Yes, side matters — door lock mechanisms are handed, so you need to specify nearside (NS, passenger/left) or offside (OS, driver/right) when contacting a breaker. The MX-5 is a two-seater roadster with two doors throughout all generations, so there is no front/rear door distinction to worry about, but getting the NS/OS correct is essential. Ordering the wrong side will mean the mechanism does not align with the door frame and latch correctly.
Will a pre-facelift NC MX-5 door lock mechanism fit a post-facelift NC?
The NC (Mk3) MX-5 ran from 2005 to 2015 and received a facelift in 2009, and while the overall body generation is the same, internal door hardware can sometimes vary across a facelift refresh. You should name the specific year of both the donor and recipient car when asking breakers, and confirm directly with the breaker that the mechanism matches your exact build date rather than assuming all NC cars interchange freely.
Does the trim level affect which door lock mechanism I need — for example, SE versus Sport or Icon?
Trim level does not affect door lock mechanism fitment on the MX-5 — the door shell and lock mechanism design is the same across SE, Sport, Icon, and other trim variants within the same generation. You may find cosmetic differences in associated door furniture such as handles or trim panels, but the lock mechanism itself is determined by generation and side (NS/OS), not trim. Simply match the generation and side and you should be fine.
Does the engine size matter when buying a used MX-5 door lock mechanism?
No — door lock mechanisms are fitted to all MX-5 variants regardless of engine size, whether that's the 1.6 or 1.8 in the NA/NB, the 2.0 in the NC, or the 1.5 and 2.0 options in the ND. Engine choice has no bearing on the door design or the lock mechanism inside it. The key details to give a breaker are your generation and whether you need NS or OS.
I have a 2004 MX-5 — will a 2005 door lock mechanism fit it?
A 2004 MX-5 is an NB (Mk2, 1998–2005), while a 2005 car falls into the NC (Mk3, 2005–2015), meaning these are different generations with different door shells and lock mechanisms. Parts from an NC will not fit an NB, so you must source a mechanism from an NB-generation donor car. Give the breaker your registration so they can confirm the exact build date and generation before supplying the part.