Get quotes for a used or replacement Mazda RX-8 side skirt. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two side skirts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The RX-8 was produced in a single generation running from 2003 to 2012, with a facelift introduced in 2008 that brought revised front and rear styling. Both a 2004 and a 2007 car sit in the pre-facelift period, so side skirts from those years are generally considered the same and should be compatible. Always confirm against your registration with the breaker before buying.
The 2008 facelift is the key boundary here — the 2009 car is post-facelift and the 2006 is pre-facelift, and while the underlying platform is the same, body panels including side skirts may differ between the two periods. Whether the skirt physically interchanges across that 2008 facelift line is something you should confirm with the breaker against your specific registration rather than assume either way. Do not purchase without checking this first.
The RX-8 was sold in the UK in various trim grades including standard, PZ, GT, R3, and later Spirit and Kuro editions, but trim level does not fundamentally change the side skirt design — fitment is determined by whether your car is pre or post the 2008 facelift, not which trim you have. That said, some sportier or special-edition trims may have had differently styled or coloured skirts fitted from the factory, so be aware of cosmetic differences when sourcing from a breaker. Confirm the skirt matches your car's facelift period.
Yes, the RX-8 was sold with side skirts as a standard body styling feature on all variants — this is a genuine OEM body panel on the car, not a dealer add-on or trim-specific item. The RX-8 was only ever sold in one body style, a four-door coupe with rear-hinged rear doors, so there is no body-style variation to worry about. Fitment comes down to whether the car is pre or post the 2008 facelift.
The engine fitted to your RX-8 — whether the standard 192bhp Renesis or the later 231bhp high-power version — has no bearing on side skirt fitment, as these are exterior body panels unrelated to the drivetrain. What matters is the facelift period: pre-facelift cars up to 2008 and post-facelift cars from 2008 onwards may have different skirt profiles. Confirm the facelift period with the breaker using your registration to be sure.
The most important thing to establish is whether your car is pre or post the 2008 RX-8 facelift, as this is the main point where exterior body panels are likely to differ. Give the breaker your full registration number so they can confirm the exact facelift period and match the part accordingly. Also check the colour code if you plan to fit the skirt without repainting, and ask the breaker to confirm the part against your reg before agreeing to buy.