Second Hand Mazda 6 Wheel Hub
Need a used Mazda 6 wheel hub? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Mazda 6 wheel hub
Used wheel hubs vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's front or rear
- State whether it's left or right
Other used Mazda 6 parts
- Used Mazda 6 Brake Discs
- Used Mazda 6 Power Steering Pump
- Used Mazda 6 Shock Absorber
- Used Mazda 6 Coil Spring
- Used Mazda 6 Drive Shaft
- Used Mazda 6 Central Locking Motor
- Used Mazda 6 Sun Visor
- Used Mazda 6 Battery
- Used Mazda 6 Rear View Mirror
- Used Mazda 6 Airbag
- Used Mazda 6 Exhaust Manifold
- Used Mazda 6 Fog Light
Used wheel hub for other Mazda models
Fitment questions
Will a wheel hub from a 2010 Mazda 6 fit my 2014 model?
This is a critical year boundary to flag: the Mazda 6 moved from the second generation (GH, 2008–2012) to the third generation (GJ, 2012–2018) in 2012, so a 2010 hub and a 2014 hub are from entirely different generations and are very unlikely to interchange. Confirm the full part numbers with the breaker against both registrations before ordering, as the hub flanges, bearing carriers, and bolt patterns differ between generations.
Does the Mazda 6 wheel hub change between the first and second generation?
Yes — the first generation Mazda 6 (GG/GY, 2002–2007) and the second generation (GH, 2008–2012) are distinct platforms with different suspension geometry, so their wheel hubs are not interchangeable. Always tell the breaker which generation your car belongs to and give them your registration so they can verify the exact part.
Does a 2015 Mazda 6 hub fit a 2017 Mazda 6?
Both years fall within the third generation (GJ, 2012–2018), so fitment is far more likely than across a generation boundary, but engine size can influence hub and brake assembly specification — a 2.5-litre petrol may carry different components to a 2.0-litre. Give the breaker your registration and the donor car's registration so they can match engine size and confirm compatibility before you commit.
Does trim level matter — will a hub from a Mazda 6 SE fit one from a Sport Nav or Executive SE?
Trim level does not affect wheel hub fitment on the Mazda 6; SE, Sport Nav, and Executive SE hubs are determined by generation and engine size, not the trim name. You may find minor cosmetic differences such as dust cap finish, but the structural hub itself should be the same across trims within the same generation and engine variant — confirm with the breaker against your registration to be sure.
Do I need to tell the breaker which side the hub is from — NS or OS?
Yes, always specify nearside (NS, driver's left) or offside (OS, driver's right) when ordering, as hubs can differ between sides depending on whether ABS sensor ports or bearing retaining features are handed. Getting the wrong side can mean the hub physically fits but the ABS ring or sensor position is incorrect, so make this clear to the breaker from the start.
Does the 2.2 diesel Mazda 6 use a different wheel hub to the 2.0 petrol?
Larger or more powerful engines sometimes necessitate uprated brake and hub assemblies to handle increased braking loads, so there is a real possibility the 2.2 diesel and 2.0 petrol hubs differ, particularly on the front axle. Confirm this directly with the breaker using both registrations rather than assuming same-generation hubs will cross over between engine variants.