Cheap Hyundai Kona Handbrake Lever
Need a used Hyundai Kona handbrake lever? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Hyundai Kona handbrake lever
No two handbrake levers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's a manual lever, foot pedal or electronic
Other used Hyundai Kona parts
- Used Hyundai Kona Headrest
- Used Hyundai Kona Sun Visor
- Used Hyundai Kona Steering Wheel Airbag
- Used Hyundai Kona Seat
- Used Hyundai Kona Wheel Trims
- Used Hyundai Kona Air Filter
- Used Hyundai Kona Inlet Manifold
- Used Hyundai Kona Roof Panel
- Used Hyundai Kona Wing Mirror
- Used Hyundai Kona Centre Console
- Used Hyundai Kona Catalytic Converter
- Used Hyundai Kona Bumper
Used handbrake lever for other Hyundai models
Fitment questions
Does the Hyundai Kona have a traditional handbrake lever?
No — the Hyundai Kona has never been fitted with a conventional pull-up handbrake lever in any of its variants. All Kona models, from the first generation launched in 2017 onwards, use an Electronic Parking Brake (EPB), operated by a button on the centre console rather than a mechanical lever. If you are looking for the EPB switch, button, or actuator motor, those are the parts you need to search for instead.
I've been quoted a handbrake lever for my Kona — is that right?
Almost certainly not — there is no mechanical handbrake lever on any version of the Hyundai Kona, so a quote for that specific part would be incorrect. What you likely need is either the Electronic Parking Brake switch (the button on the console), the EPB actuator/motor on the rear caliper, or a rear brake caliper with the integrated EPB mechanism. It is worth going back to the breaker and clarifying exactly which component you need, describing where the fault lies.
What years did the first-generation Hyundai Kona run, and does the EPB switch differ across those years?
The first-generation Kona ran from 2017 to 2023, with a facelift arriving around 2021. The EPB switch style and centre console layout can differ between the pre-facelift (2017–2020) and facelift (2021–2023) versions, so you should not assume the switch will be a direct swap across that boundary — confirm the part against your exact registration with the breaker. The second-generation Kona arrived from 2023 onwards and is a completely different vehicle, so parts from that generation will not cross over.
Does the EPB switch vary between Kona trim levels such as SE, SE Connect, Premium, or N Line?
The centre console design and switch surround can vary between trim levels, particularly on higher specifications like Premium or N Line which may have different fascia finishes. The underlying EPB switch function is the same across trims, but the appearance and the surrounding trim panel may differ, so a switch pulled from an SE car may look slightly different in a Premium interior. Always tell the breaker your trim level so they can match the correct console assembly or switch bezel.
Will an EPB actuator from a 2019 Kona fit my 2022 Kona?
These sit either side of the generation boundary — the 2022 Kona is a late facelift first-generation car, while the 2019 is a pre-facelift first-generation, so they share the same basic platform and rear brake architecture. In principle the EPB actuator on the rear caliper may carry over, but subtle changes can occur across a facelift, so you should confirm compatibility with the breaker using both registrations before purchasing. Never assume fitment without that check.