Hyundai Getz Handbrake Lever Replacement Parts
Get quotes for a used or replacement Hyundai Getz handbrake lever. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Hyundai Getz handbrake lever
No two handbrake levers are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's a manual lever, foot pedal or electronic
Other used Hyundai Getz parts
- Used Hyundai Getz Rear View Mirror
- Used Hyundai Getz Curtain Airbag
- Used Hyundai Getz Instrument Cluster
- Used Hyundai Getz Glove Box
- Used Hyundai Getz Propshaft
- Used Hyundai Getz Rear Tailgate
- Used Hyundai Getz Centre Console
- Used Hyundai Getz Body Control Module
- Used Hyundai Getz Heater Matrix
- Used Hyundai Getz Intercooler
- Used Hyundai Getz Oil Pump
- Used Hyundai Getz Parking Sensor
Used handbrake lever for other Hyundai models
Fitment questions
Does the Hyundai Getz have a handbrake lever, or does it use a different type of parking brake?
Yes, the Hyundai Getz uses a conventional mechanical handbrake lever mounted between the front seats, so a used lever from a breaker is a straightforward used part to source. This applies to all Getz variants sold in the UK — there were no electronic parking brake versions on this model.
Will a handbrake lever from an early Getz (2002–2005) fit a facelifted Getz (2005–2009)?
The Hyundai Getz ran from 2002 to 2009, with a facelift arriving around 2005 that brought interior and exterior revisions. The handbrake lever position and general design are similar across both phases, but whether the lever and its cable attachment interchange directly across the 2005 facelift boundary is something you should confirm with the breaker against your registration, as subtle changes to the centre console surround or cable routing may affect compatibility. A good breaker will check this against your VIN.
Does it matter whether the donor car is a 3-door or 5-door Getz when buying a used handbrake lever?
No — the handbrake lever itself sits in the centre console and is not specific to door count on the Getz. You may find minor cosmetic differences in the surrounding trim panel depending on the body style, but the lever unit should be interchangeable, so don't rule out levers from either body style when getting quotes.
Does the trim level — for example GSi versus CDX — affect which handbrake lever I need?
Trim level is unlikely to affect the handbrake lever itself on the Getz, as it is a mechanical component shared across the range. You may see cosmetic differences such as the finish or stitching on the gaiter depending on trim grade, so check with the breaker whether the gaiter is included and matches your interior if appearance matters to you. The mechanical fitment should not be a concern across trim levels.
Does the engine or gearbox type affect which handbrake lever fits my Getz?
No — engine choice and whether the car has a manual or automatic gearbox do not affect the handbrake lever fitment on the Getz. The lever is an interior mechanical part, so you can source one from any Getz regardless of its engine size or transmission type, and concentrate instead on matching the model year to stay within the correct generation.
What should I check with the breaker before buying a used Getz handbrake lever?
Give the breaker your registration or VIN and let them confirm the model year and facelift phase of their donor car against yours, particularly if either car is close to the 2005 facelift year. It is also worth asking whether the handbrake gaiter and any surrounding console trim are included, as these vary slightly by trim grade and condition. A reputable breaker will check parts compatibility against your reg before quoting.