Used Hyundai ix35 Door Lock Mechanism

The ix35 ran as a single generation in the UK from 2010 to 2015, with a facelift arriving around 2013, so a 2012 unit and a 2015 unit sit either side of that facelift boundary. The door lock mechanism may or may not interchange across that facelift year, so you should confirm with the breaker against both registrations before buying. Make sure you also match the side (NS for nearside/passenger, OS for offside/driver) as these are not interchangeable.

Yes, absolutely — door lock mechanisms are side-specific, so a nearside (NS, passenger/left) unit will not swap with an offside (OS, driver/right) unit. When contacting a breaker, always state clearly which side you need to avoid an expensive mistake. If you are unsure which side is which, NS is the side closest to the kerb in normal UK driving.

Yes, every door on the Hyundai ix35 is fitted with a door lock mechanism as standard — this is a conventional part present on all variants of the model regardless of engine, drivetrain, or trim level. There is nothing unusual about the ix35's door arrangement that would mean the part is absent on any version.

No, trim level does not affect door lock mechanism fitment on the ix35 — the mechanism is determined by the generation, the facelift boundary, and the door side (NS or OS), not by whether the car is a Classic, Style, Premium, or Premium SE. You may find cosmetic differences around the door furniture between trim levels, but the lock mechanism itself follows the same fitment rules. Focus on matching the side and confirming the pre- or post-facelift year with the breaker.

The ix35 received its facelift around 2013, and while the body shell is closely related across the full 2010–2015 production run, whether the door lock mechanism is identical across that boundary is something you should confirm with the breaker against both vehicle registrations. Name the side you need (NS or OS) and provide both reg numbers so the breaker can check their parts references directly. Do not assume cross-facelift compatibility without that confirmation.

No, the engine type and drivetrain layout do not affect door lock mechanism fitment on the ix35 — the mechanism is the same regardless of whether the car is a 1.6 petrol, 2.0 petrol, 1.7 diesel, or 2.0 diesel, and regardless of whether it is two-wheel drive or four-wheel drive. What matters is the generation, which side of the car the door is on (NS or OS), and whether the donor car is pre- or post-facelift, which you should confirm with the breaker.