Second Hand Hyundai i30 Anti Roll Bar

These are different generations — the first-generation i30 ran from 2007 to 2012, while the second generation started in 2012, so a 2008 bar and a 2014 bar are from entirely separate platforms and will not interchange. The front and rear anti roll bars changed with the new bodyshell and suspension geometry, so you need to match the generation exactly. Always confirm the part number with the breaker against your registration to be certain.

Yes, the Hyundai i30 has both front and rear anti roll bars as standard across its generations — this is a conventional front-wheel-drive family hatchback with a fully independent suspension setup that uses anti roll bars at both axles. There is no drivetrain restriction here; all standard i30 variants carry this part. Give the breaker your registration so they can pull the correct bar for your axle and generation.

On the i30, engine size can influence the diameter and stiffness specification of the anti roll bar, particularly between lighter naturally aspirated engines and heavier or more powerful units, so it is worth telling the breaker your exact engine when you enquire. However, whether a specific bar from a different engine variant will physically interchange is something to confirm with the breaker against your registration rather than assume. Do not rely on the bars looking similar as confirmation of compatibility.

Trim level — whether Classic, Comfort, Style, SE, or Premium — does not affect which anti roll bar was fitted; the suspension hardware follows the generation and engine, not the trim grade. You may find minor cosmetic differences in brackets or end-link fittings depending on the specific car, but trim alone is not a fitment consideration. Confirm the generation and engine with the breaker and they will be able to match the correct bar to your car.

The 2012 model year sits right on the boundary between the first generation (2007–2012) and the second generation (2012 onwards), so a 2012 car could be either depending on exactly when it was registered. This matters significantly for the anti roll bar because the two generations have different platform geometry and the bars do not interchange. Give the breaker your registration plate and they can confirm which generation your car is and source the correct part.

Yes, the front and rear anti roll bars are completely different parts with different diameters, mounting points, and end-link arrangements, so you must specify which axle you need when contacting a breaker. Both bars exist on the i30 across all generations, but they are not interchangeable with each other. Let the breaker know your registration, the axle required, and your engine size so they can match the right bar.