Need a used Hyundai Getz coil pack? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used coil pack varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, but only on the petrol variants — the Getz was sold in the UK with a range of petrol engines (including 1.1, 1.3, 1.4, and 1.6 units) and these use either a coil pack or individual coils depending on the specific engine code. The diesel variant (the 1.5 CRDi) is a compression-ignition engine and does not use a coil pack at all, so if you have the diesel Getz this is not the part you need. Check your V5 or run a VIN check to confirm your engine code before searching.
The Hyundai Getz ran as a single generation from 2002 to 2009, with a facelift in 2005, so a 2003 and a 2007 car sit either side of that facelift boundary. Engine codes are the key factor here — if both cars share the same engine code the coil pack is likely compatible, but ancillary or mounting changes can occur across a facelift year, so confirm with the breaker against your registration before purchasing.
Trim level — whether your Getz is a standard, Atlantic, or CDX — makes no difference to the coil pack, as this is a mechanical part determined entirely by the engine code, not the badge on the back. The CDX and Atlantic share the same engine options as lower trims, so the coil pack requirement is identical across trims for any given engine. Just supply your engine code and registration to the breaker and they can match the correct unit.
The engine code matters more than the displacement alone, because Hyundai used more than one variant of the 1.4 petrol in the Getz across its production run and there can be differences in ignition components between them. Your engine code will be on your V5 logbook or available via a VIN check, and supplying it to the breaker is the single most useful thing you can do to ensure you get the right part. Do not assume all 1.4 units are identical.
Almost certainly not — the 1.1 and 1.4 petrol engines in the Getz are different engine families with different engine codes, and the ignition system components are matched to the specific engine. Always match the coil pack to the engine code of your own car rather than just the model name. Give the breaker both your registration and your engine code so they can confirm the part is from the correct engine before it's sent out.
No — body style has no bearing on coil pack fitment whatsoever, as the ignition system is entirely determined by the engine fitted, not the number of doors. A coil pack from a 3-door Getz with the same engine code as your 5-door (or vice versa) is the same part. Focus on engine code and fuel type, and ignore body style entirely when searching.