Used Ford P100 Door Card

A door card is the interior trim panel that lines the inside of a vehicle door, covering the mechanism and providing a finished surface with handles, switches, and storage pockets. The Ford P100 is a pickup truck based on the Ford Sierra, and it does have door cards on its cab doors. As a single-cab pickup with two doors, there is one card per side — nearside (NS, passenger left) and offside (OS, driver right) — so make sure you specify which side you need when requesting quotes from a breaker.

The Ford P100 was produced from 1983 to 1992 and received a significant facelift around 1987-1988 which aligned it more closely with the Sierra Mk2, bringing changes to the cab interior and trim. Door cards from before and after this facelift are unlikely to be interchangeable, so it is important to tell the breaker the exact year of your vehicle so they can match against the correct phase. Never assume a pre-facelift card will drop straight into a post-facelift cab without confirming fitment with the breaker against your registration.

The P100 was offered in trim levels including base, L, GL, and Ghia, and while higher trims typically featured upgraded interior materials, additional switches, or different finishes, the basic shape and fixing points of the door card frame are generally the same across trims. This means a door card from a lower trim may physically fit a higher-spec vehicle, but you should expect cosmetic differences in fabric, colour, or any integrated switch apertures. A breaker can advise whether a specific card from a different trim will meet your needs, particularly if your original had features like an electric window switch housing.

Yes, side absolutely matters — the nearside (NS, left/passenger) and offside (OS, right/driver) door cards are mirror images of each other and are not interchangeable. Always specify NS or OS clearly when requesting a quote from a breaker, as supplying the wrong side is one of the most common fitment mistakes with door panels. The P100 is a two-door single-cab pickup, so there are no rear door cards to worry about.

The Ford P100 shares its cab structure with the Ford Sierra, and there is a degree of parts commonality between the two, meaning Sierra door cards may have been used on P100 cabs depending on the production phase. However, whether a specific Sierra card will directly fit your P100 depends on the year of both vehicles and which phase of Sierra it came from, so this is not something that can be guaranteed without checking. Ask the breaker to confirm compatibility against both registrations before purchasing, as subtle differences in trim clips, switch apertures, or panel shape can prevent a direct swap.

No — the engine fitted to your P100, whether the 1.6 petrol, 2.0 petrol, or 2.5 diesel, has no bearing on which door card you need. Door card fitment is determined by the cab generation and production phase, not the drivetrain, so you can source a card from any P100 of the matching phase regardless of what engine it had. Focus on matching the year range and side (NS or OS) when talking to a breaker.