Ford Ka Bonnet Latch Replacement Parts

The Mk1 Ka ran from 1996 to 2008 and the Mk2 from 2008 onwards, and these are completely different platforms, so the bonnet latch from a Mk1 will not fit a Mk2. Always source a latch from the same generation as your car. Your breaker will confirm the correct part against your registration.

Yes, the generation is the most important factor — Mk1 (1996–2008) and Mk2 (2008 onwards) are entirely different vehicles and their bonnet latches are not interchangeable. Within each generation, the latch is generally shared across the range, so minor year-to-year differences within the same generation are unlikely to be a problem. Confirm the exact part with your breaker using your registration to be sure.

No, trim level does not affect bonnet latch fitment on the Ford Ka — the latch mechanism is the same whether your car is a Studio, Zetec, Grand Prix, or any other trim. The bonnet release and latch assembly are structural front-end components shared across the trim range within a generation. Just make sure you match the correct generation when sourcing from a breaker.

The Mk1 Ka ran through to 2008, so a 2005 and a 2008 Ka are both within the same generation and the bonnet latch should be compatible. However, the Mk2 Ka also launched in 2008, so if the donor car is a Mk2 rather than a late Mk1, the parts will not interchange. Check with your breaker and confirm both cars' registrations to make sure you are matching like-for-like.

Engine size makes no difference to bonnet latch fitment on the Ford Ka — the latch is a body component shared across all engine variants within a generation. Whether your Ka has the 1.0 or 1.3 petrol engine, the correct latch is determined by generation, not what is under the bonnet. Source from a breaker and confirm against your registration for peace of mind.

The key detail to confirm is which generation your Ka belongs to — Mk1 (1996–2008) or Mk2 (2008 onwards) — and ensure the breaker's donor car is from the same generation. Trim level and engine size do not affect fitment, so you do not need to worry about matching those. Give the breaker your registration number so they can verify the correct part before you buy.