Used Fiat 500X Wheel Trims

Wheel trims (plastic hub caps) were fitted to entry-level Fiat 500X variants supplied with steel wheels, typically on lower trim grades such as Pop and Pop Star where steel wheels were standard. Higher trim grades such as Cross, Cross Plus, and Sport typically came with alloy wheels from the factory, so those variants would not have had wheel trims. If your 500X has steel wheels, trims are a genuine part; if it has alloys, you are likely looking for alloy wheels or centre caps instead.

The Fiat 500X was launched in 2014 and received a facelift in 2018, so a 2016 car is pre-facelift and a 2020 car is post-facelift. The key fitment factor for wheel trims is the steel wheel diameter and the number of fixing clips, and whether these carried over across the 2018 facelift boundary is something you should confirm with the breaker against your registration, as trim and wheel specifications can change at a facelift. Tell the breaker the exact wheel size marked on your steel wheels (for example 16-inch or 17-inch) to help them match correctly.

For wheel trims specifically, engine size is unlikely to be the deciding factor — what matters is the diameter and fitment style of the steel wheels your car was built with. Unlike brakes or suspension, wheel trims simply clip over the steel wheel and are governed by wheel size rather than drivetrain. Check the wheel diameter stamped on your steel wheel or listed in your handbook, and quote that size to the breaker.

Trim level itself does not affect wheel trim fitment — what matters is whether both cars have the same size steel wheels. Pop, Pop Star, and other lower-grade trims that came with steel wheels should share the same trim if the wheel diameter matches, though there may be cosmetic differences such as colour or logo style between model years. Confirm the wheel size with the breaker against your registration to be sure.

Entry-level Fiat 500X models were typically supplied with 16-inch steel wheels, meaning they would take 16-inch wheel trims, but you should verify the exact size on your own steel wheel before ordering. The size is usually stamped into the wheel itself or listed on the tyre sidewall and in the handbook. Give this confirmed size to the breaker so they can match it accurately.

Yes, breakers are a practical source for a replacement 500X wheel trim, especially as new plastic trims can be disproportionately expensive for what they are. Make sure you tell the breaker your steel wheel diameter, the year of your car, and your registration so they can cross-reference the correct trim. Bear in mind that a used trim from a different model year may have a slightly different finish or logo, but functionally it should fit if the wheel size matches.