Cheap Volkswagen Crafter Window Regulator

You'll need to know the generation of your Crafter (first generation 2006–2016, or second generation 2017-onwards), which door the regulator is from (NS nearside or OS offside, plus front or sliding rear door), and whether your van has a single or twin sliding door setup, as the wheelbase affects which sliding door regulator fits. Confirm the electric or manual type with the breaker against your registration, as this can vary within the same generation. Never assume a part fits without cross-checking your reg.

2013 falls in the first-generation Crafter (2006–2016) and 2017 is the start of the second generation, so these are different platform vehicles and the regulators are very unlikely to be interchangeable. Name the generation boundary to the breaker and ask them to check your specific door position (NS/OS, front or sliding rear) against your registration. Never assume cross-generation fitment.

Yes, for the sliding rear door specifically, wheelbase can affect the door dimensions and therefore which regulator is correct — a long-wheelbase Crafter may use a different sliding door setup to a medium-wheelbase variant. For the front doors, wheelbase does not affect regulator fitment. Always confirm your wheelbase and door position with the breaker against your registration.

Yes, this is one of the most important details — a hinged rear door regulator and a sliding side door regulator are completely different parts and will not interchange. Make sure you specify clearly to the breaker whether you need a front door regulator or a sliding side door regulator, and confirm NS (nearside/passenger side) or OS (offside/driver side). Getting this wrong means the part will not fit.

Trim level does not affect window regulator fitment on the Crafter — what matters is the generation, door position (NS/OS), and door type (front or sliding). You may find cosmetic differences between parts from different specs, but the mechanical regulator frame is what determines fitment. That said, confirm whether your door is electric or manual with the breaker against your registration, as this can vary.

The first-generation Crafter ran from 2006 to 2016, but confirm with the breaker whether any mid-cycle updates to door internals affect regulator compatibility within that generation, as minor running changes can occur. For the second generation (2017-onwards), the same caution applies to any later updates. Always give the breaker your full registration so they can check the exact part against your vehicle rather than relying on year alone.