Cheap Volkswagen Crafter Headrest

The Crafter comes in two distinct generations: the first generation ran from 2006 to 2016, and the second generation from 2017 onwards, and headrests are not interchangeable between these two generations as the seat designs differ significantly. Within the same generation, headrests are much more likely to be compatible, but trim level and seat style can still affect the fit and appearance, so always confirm the exact seat specification with the breaker against your registration. Never assume a cross-generation headrest will simply swap in.

This question crosses the key generation boundary: the first-generation Crafter ran until 2016 and the second generation launched in 2017 with an entirely redesigned interior, so these two headrests are very unlikely to be compatible. The seat frames, trim attachment points, and post diameters differ between generations, meaning a 2015 part is designed for a fundamentally different seat. Confirm with the breaker whether any cross-generation compatibility exists for your specific seats, but realistically you should source a second-generation part from a 2017-onwards Crafter.

Yes, trim level can matter on the Crafter because different trim and specification levels were offered with different seat types — for example, basic cab seats differ from those found in higher-specification or passenger-variant Crafters, and the headrest posts and pad design can vary accordingly. If your Crafter has cloth seats on a standard spec versus a higher or comfort-spec interior, the headrests may look or attach differently even within the same generation. Tell the breaker your trim level and whether your vehicle is a panel van, window van, or minibus/kombi variant, as seat style varies across these body configurations.

For most standard Crafter front headrests, the left (NS) and right (OS) headrests are identical and interchangeable, as they are typically symmetrical padded units on matching posts. However, if your Crafter has a seat with an integrated side-bolster, special comfort seat, or any built-in feature on a specific side, you should confirm with the breaker that the headrest is a match for your exact seat. Rear headrests in passenger or kombi variants can also vary by row or position, so specify exactly which seating position you need when contacting a breaker.

Not necessarily — the Crafter was offered in panel van, window van, and minibus/kombi body styles, and the rear seat headrests in passenger-carrying variants are often specific to those bench or individual rear seats, which are not found in a standard panel van at all. Front cab headrests are more likely to be shared across body styles within the same generation, but even these can vary by seat specification. Confirm the body style and seat type with the breaker to make sure the part is sourced from the correct vehicle configuration.

In principle, second-generation Crafters from 2017 onwards share the same basic interior architecture, so a headrest from another 2017-onwards Crafter is your best starting point for compatibility. However, VW updated and revised specifications across the production run, and seat options varied by trim and body style, so an exact match is not guaranteed purely by year. Share your registration with the breaker so they can match the seat type precisely rather than relying on year alone.