Compare prices on a used Volkswagen Amarok aerial from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used aerials vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, all variants of the Volkswagen Amarok were fitted with a roof-mounted stubby aerial (also called a shark-fin or whip aerial depending on the generation) for radio reception. It sits on the roof and is a standard fitment across the range regardless of engine or drivetrain. If yours is damaged or missing, used replacements are widely available from breakers.
The Amarok received a significant facelift in 2016, and while the roof mounting point is broadly similar, the style of aerial can differ between the pre-facelift and post-facelift trucks. It is worth confirming with the breaker whether the unit from their vehicle matches your registration, as a mismatch in base style or connector type could cause fitting issues. Never assume a pre-2016 aerial will drop straight onto a post-2016 Amarok without checking.
Trim level does not affect aerial fitment in any meaningful mechanical way - the aerial and its roof base are the same across Trendline, Trendline Plus, Highline, and Aventura variants. You may notice cosmetic differences in finish or colour between trims, so if a colour-matched or chrome finish matters to you, mention that to the breaker. Functionally, any aerial from the correct generation Amarok should serve the same purpose.
No, the engine variant makes no difference to aerial fitment on the Amarok - the aerial is mounted on the roof and has no connection to the drivetrain or engine type. Whether the donor vehicle was a 2.0 TDI or a 3.0 V6 TDI, the aerial itself will be the same. Focus instead on matching the generation and checking the base connector matches yours.
The key things to confirm are the generation of the donor vehicle (pre-facelift 2010-2016 or post-facelift 2016 onwards), the style of aerial base, and the connector type at the base of the aerial lead. Confirm these details with the breaker against your registration plate so they can pull the correct part. It is also worth checking the condition of the base seal, as a damaged seal can allow water ingress into the roof.
Replacing a stubby or shark-fin aerial on the Amarok is generally straightforward and many owners do it themselves - it typically unscrews from a base plate on the roof, and the cable feeds through to the headunit. However, if the base plate or wiring needs to be replaced as well, it is worth having a competent auto electrician check the connector and routing. Always confirm with your breaker that the full base assembly is included if yours is damaged, not just the top mast.