Cheap Vauxhall Vectra Track Rod

The Vectra B ran from 1995 to 2002 and the Vectra C from 2002 to 2008, and these are entirely different platforms with different steering geometry, so a track rod from a B will not fit a C. Always source a track rod from the correct generation to match your car.

The Vectra C was facelifted in 2005 but the front subframe and steering components were not significantly redesigned at that point, so track rods from pre- and post-facelift Vectra Cs are generally considered interchangeable — however, confirm this with the breaker against your exact registration before buying, as minor running changes can catch you out.

For the Vectra, track rod fitment is primarily determined by generation (B or C) rather than engine size, as the steering rack setup is common across the petrol and diesel engine range within each generation. If you have an unusual or high-output variant, mention your engine size to the breaker so they can double-check against their parts.

Trim level does not affect track rod fitment on the Vectra C — an LS, SXi, CDTi, or Elegance car all share the same steering setup, and the VXR uses the same track rod ends on the same generation platform. Source by generation and confirm your registration with the breaker rather than worrying about trim badges.

Yes, track rods on the Vectra are handed — there is a nearside (NS, left) and an offside (OS, right) — and fitting the wrong side will mean the rod is the wrong length and thread orientation for correct steering geometry. Always tell the breaker which side you need when requesting a quote.

Your 2006 car falls in the post-facelift Vectra C period (facelift from 2005, production ending 2008), so you should be searching for a Vectra C track rod from roughly 2002–2008 — parts from across the full C range are likely to be compatible, but confirm fitment with the breaker using your registration to be certain.