Vauxhall Insignia Track Rod Replacement Parts
Get quotes for a used or replacement Vauxhall Insignia track rod. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Vauxhall Insignia track rod
A used track rod that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's left or right
Other used Vauxhall Insignia parts
- Used Vauxhall Insignia Brake
- Used Vauxhall Insignia Handbrake Cable
- Used Vauxhall Insignia Steering Column
- Used Vauxhall Insignia Brake Discs
- Used Vauxhall Insignia Sunroof
- Used Vauxhall Insignia Headlight
- Used Vauxhall Insignia Lambda Sensor
- Used Vauxhall Insignia Indicator Stalk
- Used Vauxhall Insignia Spoiler
- Used Vauxhall Insignia Wiper Blades
- Used Vauxhall Insignia Radio
- Used Vauxhall Insignia Clutch
Used track rod for other Vauxhall models
Fitment questions
Does a track rod from a 2010 Insignia fit a 2014 Insignia?
The Insignia Mk1 ran from 2008 to 2017, but received a facelift in 2013, and whether track rod ends interchange across that facelift boundary is something you should confirm with the breaker against your exact registration rather than assume. The steering geometry components can vary even within the same generation, so quote your reg to the breaker and ask them to verify the part number matches before buying. Never assume a pre-facelift part is a straight swap for a post-facelift car without that check.
Will a Vauxhall Insignia Mk1 track rod fit a Mk2 Insignia?
The Insignia Mk2 (also called the Insignia B or Grand Sport/Sports Tourer) launched in 2017 and is a substantially different platform from the Mk1 (2008–2017), so track rod ends from these two generations are not interchangeable. Always buy from the correct generation and confirm the part against your registration with the breaker.
Does engine size affect which track rod I need for my Vauxhall Insignia?
For the Insignia, engine size does not typically influence track rod fitment the way it might affect brakes or suspension loads — the steering geometry is broadly consistent across the engine range within each generation. That said, always quote your full registration to the breaker so they can cross-reference the exact part number, as there can be subtle specification differences depending on the variant.
Does it matter whether I need a nearside or offside track rod on my Insignia?
Yes, side absolutely matters — the nearside (NS, driver's left, passenger side) and offside (OS, driver's right) track rod ends are handed and are not interchangeable. When contacting a breaker, always specify NS or OS clearly alongside your registration to make sure you get the correct part.
Does my Insignia SRi need a different track rod to an SE or Design trim?
Trim level — whether SE, Design, SRi, or Elite — does not affect track rod fitment on the Insignia, as the steering components are determined by the generation and any mechanical specification rather than the trim grade. The breaker may supply a part from any trim donor car as long as it matches your generation and registration, so don't worry about sourcing specifically from an SRi if that's what you have.
What year did the Insignia Mk2 come out, and does that affect buying a used track rod?
The Vauxhall Insignia Mk2 (Grand Sport and Sports Tourer body styles) was introduced for the 2017 model year, making it a completely separate generation from the original Mk1 (2008–2017). If you have a post-2017 Insignia, you must source track rod ends specific to the Mk2 — Mk1 parts will not fit. Confirm your registration with the breaker to ensure they match the correct generation.