Findapart

Cheap Škoda Yeti Radiator Fan

Get quotes for a used or replacement Škoda Yeti radiator fan. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Yeti radiator fan

Used radiator fans vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Yeti parts

Used radiator fan for other Škoda models

Fitment questions

Will a radiator fan from an older Škoda Yeti fit my newer one?

The Yeti ran as a single generation from 2009 to 2017, with a facelift in 2013 that brought styling and some mechanical updates. Whether a fan from a pre-facelift (2009–2013) car crosses over to a post-facelift (2013–2017) car depends primarily on the engine code, so match that first. Confirm with the breaker against your registration whether any mounting or ancillary bracket changes between the two phases affect your specific setup.

Does the Škoda Yeti actually have a radiator fan, or does it use a different cooling system?

Yes, the Yeti does have a radiator fan — it uses an electric cooling fan mounted at the front of the engine bay, and this applies across the petrol and diesel variants. All Yeti engines needed active fan cooling, so this is a genuine part you can source from a breaker.

Does the radiator fan differ between petrol and diesel Škoda Yeti models?

Yes, fuel type affects which fan assembly was fitted, so a fan from a diesel Yeti is not necessarily a straight swap onto a petrol one. The engine code is the most reliable way to match the correct fan — you'll find this on your V5 or through a VIN check. Always quote your engine code to the breaker so they can pull the right unit.

Does the trim level matter when buying a used radiator fan for a Škoda Yeti — for example, will one from an S fit an SE or Elegance?

No, the trim level makes no difference to radiator fan fitment — the fan is determined by the engine and drivetrain, not whether the car was a base S, mid-spec SE, or higher Elegance trim. You may find minor cosmetic differences in surrounding shrouds or brackets depending on what else the donor car was fitted with, so mention your trim to the breaker but don't treat it as a critical matching factor.

My Yeti is a 2.0 TDI — can I use a fan from any other 2.0 TDI Yeti?

The engine code within the 2.0 TDI family matters more than the badge, as Škoda used several different TDI codes across the Yeti's production run that can have different fan specs. Provide your exact engine code (for example CFHC, CFFB, or CFJA — found on your V5 or a VIN check) to the breaker rather than relying on 'TDI' alone. This gives the breaker the best chance of pulling a compatible unit rather than guessing by year or displacement alone.

Does it matter whether my Yeti is four-wheel drive or front-wheel drive when buying a replacement radiator fan?

The drive layout can influence which fan assembly was used, as 4WD models may have different cooling demands or ancillary routing compared to front-wheel-drive versions. That said, the engine code remains the primary matching point, so lead with that when contacting a breaker. Mention whether your car is 4WD or 2WD as supporting information and ask the breaker to confirm compatibility against your registration.