Findapart

Cheap Škoda Roomster Parking Sensor

Get quotes for a used or replacement Škoda Roomster parking sensor. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Roomster parking sensor

No two parking sensors are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Roomster parts

Used parking sensor for other Škoda models

Fitment questions

Did the Škoda Roomster ever come with parking sensors fitted from the factory?

Yes, parking sensors were available on the Škoda Roomster (2006–2015) as either a factory-fitted option or dealer-fitted accessory, typically rear sensors, on higher specification cars. Not every Roomster left the factory with them, so whether your specific car has the wiring loom and bumper cut-outs already in place depends on how your individual vehicle was specified. Before buying a used sensor kit, check your bumper for existing sensor holes or blanking grommets, as this will tell you whether your car was originally prepared for sensors.

Will parking sensors from a pre-facelift Roomster (2006–2010) fit a facelift model (2010–2015)?

The Roomster received a facelift in 2010, which brought changes to the bumper styling, and because parking sensors are mounted in and wired through the bumper, sensors and their harnesses from a pre-facelift car may not transfer cleanly to a facelift bumper. Whether the sensor units themselves are electrically compatible is possible, but physical fitment into the bumper cut-outs and connector compatibility across that 2010 boundary is something you should confirm with the breaker against your registration before buying. A breaker who has stripped both generations will be best placed to advise.

Does the trim level affect which parking sensors I need – for example, does a Comfort spec car use different sensors to an Elegance or Scout?

The trim level itself does not change the type or specification of the parking sensor units fitted – the sensors are the same components regardless of whether the donor car was a Comfort, Elegance, or Scout. What you should be aware of is that higher trims were more likely to have sensors factory-fitted, so a sensor set sourced from an Elegance is a perfectly reasonable match for a Comfort as long as both cars are the same generation. If your bumper already has holes cut, focus on matching the sensor colour to your bumper finish, as used sensors often come in the colour of the donor car.

Can I use parking sensors from a Škoda Fabia or SEAT Ibiza on my Roomster?

Škoda and SEAT shared components within the VAG group during the Roomster's production run, and the individual sensor units (the cylindrical ultrasonic sensors themselves) can be the same part across several VAG models of the same era. However, the wiring loom, control module, and bumper bracket arrangement are more vehicle-specific, so a complete donor kit from a Fabia or Ibiza may need adaptation. It is worth describing what you need precisely to the breaker – whether just the sensor stubs, the full loom, or the control unit – so they can check parts match your registration.

Does the engine or gearbox fitted to my Roomster make any difference to which parking sensors I need?

No – parking sensors are entirely independent of the engine or gearbox fitted to your Roomster, so a 1.2 petrol car and a 1.6 TDI diesel car of the same generation will use the same sensor components. The factors that matter are the model year (pre- or post-2010 facelift) and the colour of the sensors to match your bumper. Focus your search on year and generation rather than engine variant.

How many parking sensors does a used Roomster kit typically include, and what should I check before buying?

Factory rear parking sensor kits on the Roomster typically use four sensors across the rear bumper, and a complete used set should include the sensors, the control module, and ideally the wiring loom. Before buying, confirm with the breaker that the donor car's registration matches the same generation as yours (pre- or post-2010 facelift), and check whether your own bumper already has the four holes cut or whether it has blanking plugs that will need to be drilled out. Buying a complete kit from a single donor car is strongly recommended over mixing individual components from different sources.