Need a used Škoda Citigo parking sensor? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used parking sensor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, parking sensors were available on the Škoda Citigo, but only as an optional extra on higher specification trim levels — they were not standard across the range, so not every Citigo will have them fitted. If your car did not leave the factory with sensors, the bumper may not have the pre-drilled holes needed to accept them, which is worth checking before buying. Confirm with the breaker whether the part they have came from a sensor-equipped car.
The Škoda Citigo was sold in the UK from 2012, with a facelift arriving around 2017 that brought updates to the bumper styling — and because parking sensors mount directly into the bumper, a sensor from a pre-facelift car may not align correctly with the holes in a facelift bumper, or vice versa. The sensors themselves are small electronic components that could potentially be compatible, but the physical fitment into a differently shaped bumper is the real concern. Confirm with the breaker whether the sensor came from a pre-facelift or facelift car and match it to your own bumper generation.
The trim level itself does not change the specification of the parking sensor unit — the sensor is the same component regardless of whether it came from an S, SE, or Edition model. What does matter is whether the donor car was actually fitted with sensors at all, as lower trims like the S were less likely to have them as standard or even as an option. The colour of the sensor cap may differ to match the car's paint, so expect a cosmetic mismatch if the donor car was a different colour — but this does not affect how the sensor works.
The Škoda Citigo, SEAT Mii, and Volkswagen up! are closely related models built on the same platform and share a significant number of components, so there is a reasonable chance that parking sensors from one will interchange with the others. However, subtle differences in bumper cutouts and sensor bracket design between the brands mean this is not guaranteed, and the facelift timing also differed slightly between models. Raise this directly with the breaker, giving them your registration, and ask whether the sensor came from a platform-sibling car.
A 2014 Citigo is a pre-facelift model, while a 2019 Citigo falls after the mid-2017 facelift, so there is a potential mismatch in bumper design that could affect physical fitment into the bumper holes. The electronic sensor unit itself may well be compatible, but confirming whether the bumper profiles and mounting points align is important before purchasing. Ask the breaker to confirm which generation their part came from and check it against your own bumper.
Retrofitting parking sensors from a breaker-sourced Citigo is possible in principle, but it requires more than just the sensors themselves — you will also need the control module, wiring loom, and ideally the bumper with holes already drilled, as drilling a bumper without a template risks incorrect spacing. Some Citigos were sold with a pre-wired loom even when sensors were not fitted, which makes retrofitting easier, so it is worth checking your existing wiring before sourcing parts. A breaker may be able to supply the full sensor kit from a factory-fitted car, which gives you the best chance of a straightforward installation.