Need a used Škoda Superb camshaft? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used camshafts vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, every Škoda Superb has at least one camshaft — it is a fundamental engine component present on both petrol and diesel variants across all generations. Most modern engines in the Superb are twin-cam (DOHC) designs, meaning there are separate intake and exhaust camshafts per cylinder bank, so the exact number fitted depends on your specific engine. When searching for a used camshaft, make sure you know whether you need the intake or exhaust camshaft, as they are not interchangeable with each other.
The engine code is the single most important piece of information — it tells a breaker exactly which camshaft profile, timing system, and dimensions your engine uses, far more reliably than the year or badge alone. You can find the engine code on your V5C logbook or by running a VIN check, and it is usually a three- or four-letter code such as BXE, CDAA, or DFGA. Always give the breaker your full engine code rather than just the fuel type or year, as several different engines were fitted to the Superb across its production run.
Almost certainly not — the Mk2 Superb and Mk3 Superb use different engine families and generations of VW Group architecture, so camshafts are not a straight swap between the two generations. The engine codes changed significantly between these generations, and even where fuel type and displacement look similar on paper, the internal specifications differ. Confirm the engine codes of both donor and recipient vehicles with the breaker before ordering, as they will be able to cross-reference compatibility directly.
No — body style makes no difference to camshaft fitment whatsoever, as the camshaft is determined entirely by the engine fitted, not the body the engine sits in. A saloon and a Combi sharing the same engine code will use an identical camshaft, so there is no need to specify body style when sourcing this part. Focus your search on matching the engine code exactly.
No, trim level has no bearing on camshaft fitment — SE, SE L, SportLine, and Laurin & Klement models fitted with the same engine code all use the same camshaft. Trim differences on the Superb relate to interior specification, equipment levels, and cosmetic features, none of which affect the engine internals. The only thing that changes camshaft specification is the engine code, so that is all you need to focus on when talking to a breaker.
The Mk2 Superb ran from 2008 to 2015, with a facelift introduced around 2013, but because the camshaft is determined by engine code rather than facelift status, many engines carried over unchanged across that boundary. If your pre-facelift and facelift vehicles share the same engine code, the camshaft is very likely to be the same part, but there can be ancillary or timing-system changes introduced mid-production that are not always obvious from the engine code alone. Confirm compatibility with the breaker by providing the engine codes and registrations of both vehicles before purchasing.