Get quotes for a used or replacement Škoda Scala fuel injector. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used fuel injectors vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Yes, but only on petrol variants — the Scala was sold in the UK with petrol engines (including 1.0 TSI and 1.5 TSI units) that use direct or port fuel injection, so injectors are a genuine part on those cars. The Scala was not offered with a diesel engine in the UK, so there is no diesel injector application for this model. If you have a petrol Scala, injectors exist and are sourced from breakers; just make sure you match on engine code rather than engine size alone.
The Škoda Scala launched in 2019 as a single generation model on the MQB-A0 platform, with a facelift arriving around 2024, so there is only one generation to consider at the time of writing. Within that span, the engine code is the critical match — injectors follow the code stamped on the block, not the model year alone. Whether any ancillary or mounting changes were made to the injector rail or fuel system mid-production is something you should confirm with the breaker against your registration, as those details can shift quietly during a production run. Supply your engine code (found on your V5 or via a VIN check) and the breaker can cross-reference accurately.
Trim level — whether SE, SE L, or Monte Carlo — has no bearing on fuel injector fitment whatsoever, because injectors are determined entirely by the engine fitted, not by the trim or any cosmetic specification. A Monte Carlo with the 1.5 TSI engine and a SE L with the same 1.5 TSI engine will use the same injector, provided the engine codes match. When buying from a breaker, ignore the trim name on the donor car and focus on matching the engine code to your own; the breaker can confirm this from your registration.
No — the 1.0 TSI and 1.5 TSI are different engines with different injector specifications, and parts from one will not be a straight swap into the other even if both are badged TSI. Always match the injector to your specific engine code rather than the engine size description, as sub-variants within the TSI family can also differ. Supply your engine code to the breaker and they will identify the correct injector for your exact unit.
Modern direct-injection engines, including those in the Scala, can sometimes require injector coding or calibration after fitting a replacement, as the ECU may need to learn the flow characteristics of the new injector. Whether your specific Scala engine requires this, and what equipment is needed, is something you should confirm with your fitting garage or a VAG specialist before buying. This is a question of installation procedure rather than parts sourcing, and it is worth establishing before you commit to a used part.
The Scala shares its MQB-A0 platform with the SEAT Ibiza (sixth generation, from 2017) and Volkswagen Polo (sixth generation, from 2017), and where the engine codes match exactly, injectors may well interchange — many breakers source injectors across this group. The engine code is the definitive test: if the donor car carries the same code as your Scala, the injector is likely compatible, but you should confirm this with the breaker against both registrations before purchasing. Cross-platform sourcing can be a useful way to find stock, but never assume fitment from platform alone.