Get quotes for a used or replacement Škoda Kodiaq fuel injector. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used fuel injectors vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Kodiaq Mk1 ran from 2016 to 2021, with a facelift arriving around 2021, so a 2017 car and a 2021 car could sit on either side of that boundary depending on build date. Fitment is driven by the engine code above all else, so if both cars share the same engine code the injectors may well interchange, but whether mounting or rail details changed across the facelift is something you should confirm with the breaker against your registration. Supply your engine code, found on your V5C or via a VIN check, when requesting quotes.
Yes, absolutely — the Kodiaq has been offered with both petrol and diesel engines, and their injectors are completely different in design, operating pressure, and fitment. Petrol variants use direct injection (GDI-style) injectors, while diesel variants use high-pressure common rail injectors, so you must specify your fuel type when searching. Your engine code, rather than just 'petrol' or 'diesel', is the most precise way to ensure a breaker supplies the correct unit.
Trim level has no bearing on injector fitment; what matters is the engine code, which is tied to the engine variant rather than the badge on the boot lid. A vRS uses a specific high-output petrol engine with its own engine code, so it will need injectors matched to that code, but that's an engine difference not a trim difference per se. Tell the breaker your engine code and fuel type and the trim name becomes irrelevant to the mechanical match.
The 2.0 TDI family covers several different engine codes — such as DCYA, DFGA, or others — and injectors are not universally interchangeable across them even if the displacement sounds the same. You should find your exact engine code on your V5C or from a VIN decoder and supply that to the breaker, as different codes can mean different injection pressures, nozzle types, or rail configurations. Never assume a '2.0 TDI' label alone is enough to confirm a match.
Fuel injectors on modern direct-injection engines, including those fitted to the Kodiaq, often carry calibration codes that should be programmed into the ECU after fitting to ensure accurate fuel delivery and emissions compliance. Whether the specific injector you buy requires coding, and what equipment is needed, is something to confirm with your fitting garage before purchase. This is a fitting and calibration question rather than a sourcing question, but it's worth factoring into the total cost when budgeting for a used injector.
The Kodiaq Mk1 received its facelift around 2021, and while the core engine families carried over, there is a possibility that ancillary or mounting details on the fuel system changed across that refresh. Engine code matching remains the primary guide, so if the codes are identical a breaker may well confirm compatibility, but you should ask the breaker to verify fitment specifically against your registration rather than assuming pre- and post-facelift parts are a straight swap. Providing your full engine code and build date will give the breaker the best chance of confirming a correct match.