Compare prices on a used Škoda Superb fuel injector from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used fuel injector varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Fuel injectors exist on all Škoda Superb engines, but the type varies by fuel system: petrol engines use port or direct fuel injectors depending on the generation and engine code, while diesel engines use high-pressure common-rail injectors — these are completely different parts and will not interchange between fuel types. Identifying your fuel type is therefore the first step before searching for a used injector. Always confirm the exact engine code from your V5 or a VIN check, as this is the single most reliable way to ensure you get the correct injector for your specific engine.
Almost certainly not — the Mk1 Superb (B5 platform, 2001–2008) and the Mk2 Superb (B6 platform, 2008–2015) use entirely different engine families with different injection systems, so an injector from a Mk1 is very unlikely to suit a Mk2 even if the engine displacement looks similar on paper. Engine codes changed significantly between these generations, and injector specifications are tied directly to the engine code rather than the displacement or badge. Give your engine code to the breaker and they can confirm whether any stock they have will match your vehicle.
The Mk2 Superb ran from 2008 to 2015 with a facelift introduced in 2013, so a 2012 car is pre-facelift and a 2014 car could be either side of that refresh depending on build date. For mechanical parts like fuel injectors, what matters is the engine code, not the facelift date — if both cars share the same engine code, the injectors are likely the same part, but ancillary changes mid-production mean you should confirm this against your registration with the breaker before purchasing.
Trim level makes no difference whatsoever to fuel injector fitment on the Škoda Superb — the S, SE, Elegance, and Laurin & Klement trims are cosmetically different but share the same engine hardware when fitted with the same engine code. What does matter is whether two cars have the same engine code and fuel type, regardless of what badge is on the boot lid. Always quote your engine code to the breaker rather than your trim name, as that is the detail they need to source the correct injector.
Not reliably — within the 2.0 TDI family across Superb generations there were several engine codes (such as BMP, BMM, CFGB, and CFFB among others) that used different injector specifications and fuel pressures, so matching on displacement alone is not sufficient. The engine code stamped on the block, listed on your V5, or confirmed via a VIN check is the definitive guide, and you should give this to the breaker rather than relying on the '2.0 TDI' label. Fitting an injector with incorrect flow characteristics can cause poor running or engine damage, so confirming the exact code before buying is essential.
The Mk3 Superb launched in 2015 on a completely new MQB platform with updated engine families, so injectors from a Mk3 are highly unlikely to be compatible with a Mk2 (2008–2015) even where engine displacements look similar, as the injection systems and engine codes differ across this generation boundary. This is exactly the kind of cross-generation swap you should route directly to the breaker, quoting both the donor vehicle's engine code and your own registration, so they can verify the part numbers match before you commit to a purchase. Never assume fitment based on displacement or fuel type alone when crossing a generation boundary.