Compare prices on a used Škoda Scala clutch master cylinder from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used clutch master cylinder varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Only some Scalas have a clutch master cylinder — specifically those fitted with a manual gearbox. Scalas ordered with the DSG dual-clutch automatic transmission do not use a conventional clutch master cylinder, as the clutch is operated electronically and hydraulically within the gearbox unit itself. If your Scala is an automatic, you will not find a clutch master cylinder to replace; if it is a manual, you will.
The Škoda Scala has been produced as a single generation since its 2019 UK launch, with no full generational change as of writing, so on paper a manual-gearbox Scala from 2019 onward shares the same basic platform. However, ancillary and mounting changes can occur mid-production without a formal facelift, so you should confirm fitment against your exact registration with the breaker rather than assume all years are identical. Your engine code — found on your V5 or via a VIN check — is the most reliable detail to give the breaker.
Trim level does not affect clutch master cylinder fitment on the Scala — the SE, SE L, and Monte Carlo trims all use the same mechanical drivetrain components for a given engine and gearbox combination. What matters is the engine code and whether the car has a manual gearbox, not the badge on the boot. Bear in mind that parts sourced from a Monte Carlo or SE L donor car are mechanically identical in this respect, though the surrounding interior trim you receive with a breaking car will differ cosmetically.
Yes, the engine code is the most important detail for matching a clutch master cylinder on the Scala — petrol and diesel variants, and different power outputs within those, can use different units. The Scala has been offered with a range of turbocharged petrol engines (including 1.0 TSI and 1.5 TSI variants) as well as a 1.6 TDI diesel, and the relevant engine code stamped on your V5 or available from a VIN check will tell the breaker exactly which unit applies to your car. Always quote your engine code rather than just 'petrol' or 'diesel' when requesting a quote.
The Scala is built on the Volkswagen Group MQB-A0 platform, which it shares with models including the VW Polo and SEAT Ibiza, so there is a reasonable chance of cross-compatibility on some variants. However, this is not guaranteed — even within the same platform, hydraulic component specifications can differ by engine code, production date, or market — so you must confirm cross-platform fitment against your specific registration with the breaker before purchasing. Giving the breaker both your engine code and the donor vehicle's engine code gives them the best chance of making an accurate match.
A used clutch master cylinder is a common and generally reasonable choice for a Scala repair, provided the donor part has low mileage and shows no signs of fluid leakage or corrosion around the bore and seals. Ask the breaker for the mileage and engine code of the donor vehicle, and confirm it matches your own engine code before agreeing a purchase. Fitting should be carried out by a qualified mechanic who can bleed the hydraulic system correctly, as air in the clutch hydraulics will prevent the clutch from operating properly.