Need a used Škoda Enyaq brake caliper? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used brake calipers vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Enyaq launched in 2021 and received a facelift in 2024, so there is a generation boundary to be aware of. Calipers from pre-facelift (2021–2023) cars may not match post-facelift (2024 onwards) cars, even if the motor output looks the same on paper. Name the boundary to your breaker and ask them to confirm fitment against both registrations before buying.
Yes – brake caliper size on the Enyaq is tied to the power output and weight of the variant, so a caliper from a lower-powered 60 or 85 kW motor car is unlikely to match one from a more powerful 150 kW or dual-motor 4x4 model. Always tell the breaker your exact motor specification, not just that it is an Enyaq, so they can pull the correct part. Do not assume calipers swap freely across power variants.
Trim level alone – Loft, Suite, Sportline or iV – does not determine caliper fitment; what matters is the motor output and whether the car is rear-wheel drive or four-wheel drive. However, Sportline models may carry a different brake specification tied to their higher-output drivetrains, so confirm the motor variant with the breaker rather than relying on trim name alone. The trim badge itself is not the deciding factor.
The Enyaq does have conventional hydraulic brake calipers on all four corners – regenerative braking supplements but does not replace the friction braking system. This means used calipers from breakers are a genuine option, and fitment questions around generation and motor variant apply in the normal way. You are looking for the right part; just make sure you match it to the correct power variant and axle (NS or OS, front or rear).
Yes, the rear axle setup differs between the single-motor rear-wheel-drive Enyaq and the dual-motor four-wheel-drive vRS or 4x4 variants, and this affects the rear caliper specification. Always confirm whether your car is RWD or AWD with the breaker, and give them your registration so they can cross-reference the exact part. Fitting a caliper from the wrong drivetrain layout is a safety-critical mistake, so do not guess.
The 2024 facelift is a known production boundary for the Enyaq, and while the overall platform is shared, brake specifications can be updated at a facelift point alongside suspension or powertrain revisions. We cannot state as fact that calipers cross this boundary safely – confirm with the breaker using both registrations to check part numbers match. If there is any doubt, a breaker pulling from a post-2024 facelift donor car is the safer route for your 2024 car.