Cheap Peugeot Bipper Fog Light

Front fog lights were available on the Bipper, but they were not fitted to every vehicle - they were typically an option or restricted to higher specification trim levels rather than standard across the range. If your Bipper did not leave the factory with fog lights, the bumper will be missing the fog light apertures or have blanking covers fitted. Check your vehicle's specification before ordering, and confirm with the breaker that the unit they have came from a like-for-like fitted example.

The Peugeot Bipper was produced from 2007 through to around 2016 before being discontinued in most markets including the UK. There was a facelift during this production run, generally considered to have occurred around 2012, at which point front-end components including the bumper, grille and lights were revised. The facelift year is the key boundary to establish when sourcing a fog light, as pre- and post-facelift front ends are styled differently.

A 2010 Bipper is pre-facelift and a 2014 Bipper is post-facelift, which means they sit either side of the approximately 2012 facelift boundary where front-end styling changed. It is unlikely these will interchange directly, but whether a specific fog light unit crosses that boundary is something you should confirm with the breaker against your registration before purchasing. Never assume compatibility across a facelift without checking.

The Bipper van and the Bipper Tepee share the same front-end platform and body structure, so fog light fitment is determined by generation and facelift period rather than whether your vehicle is the panel van or the Tepee people carrier. Tell the breaker your registration and whether your vehicle has fog lights already fitted, and they can confirm the correct part.

Engine choice and trim level do not affect fog light fitment on the Bipper - the front-end panels are shared across the range regardless of whether you have a petrol or diesel engine or what specification level your van is. The only meaningful variables are the facelift period and whether fog lights were fitted to your particular vehicle from new. A breaker will match the part to your registration to confirm it came from the right period.

Fog lights are side-specific, so you do need to state whether you want the nearside (NS, left-hand side as you sit in the vehicle) or offside (OS, right-hand side) unit when contacting a breaker. Getting this wrong means the fitting angle and any wiring connector orientation may not match, so always be clear about which side needs replacing when requesting quotes.