Used Nissan 350Z Steering Wheel
Compare prices on a used Nissan 350Z steering wheel from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Nissan 350Z steering wheel
Used steering wheels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State if it needs the airbag included
- State if it needs multifunction controls
Other used Nissan 350Z parts
- Used Nissan 350Z Subframe
- Used Nissan 350Z Steering Rack
- Used Nissan 350Z Wishbone
- Used Nissan 350Z Brake Caliper
- Used Nissan 350Z Wheel Trims
- Used Nissan 350Z Window Winder Motor
- Used Nissan 350Z Brake Master Cylinder
- Used Nissan 350Z Dashboard
- Used Nissan 350Z Instrument Cluster
- Used Nissan 350Z Battery
- Used Nissan 350Z Centre Console
- Used Nissan 350Z Parking Sensor
Used steering wheel for other Nissan models
Fitment questions
Does a steering wheel from an early Nissan 350Z fit a later one?
The Nissan 350Z was produced from 2002 to 2009, with a facelift arriving around 2006 that brought interior revisions including changes to the steering wheel design and controls. Pre-facelift (2002–2005) and post-facelift (2006–2009) wheels may differ in fitment, hub spline, and airbag connector, so crossing that boundary is something you should confirm with the breaker against your exact registration before ordering.
Will a steering wheel from a Nissan 350Z with the 3.5 V6 fit my car — mine is also a 3.5?
All Nissan 350Z models sold in the UK used the 3.5-litre V6 engine, so engine size does not create any fitment variation for the steering wheel on this model. The main thing that affects whether a used wheel will interchange is the model year relative to the 2006 facelift, not the engine.
Does the trim level affect which steering wheel fits my Nissan 350Z — for example, does a GT or Touring wheel fit a standard car?
Trim level does not affect the fundamental fitment of the steering wheel hub and spline, so a wheel from a GT or Touring variant will physically locate the same way as one from a lower-spec car. However, higher-spec trims often had leather-wrapped wheels, additional controls, or different stitching, so the cosmetic finish may differ from your original — worth checking with the breaker what spec the donor car was.
I have a 2004 Nissan 350Z — can I use a steering wheel from a 2007 car?
A 2004 car is pre-facelift and a 2007 car is post-facelift, meaning the steering wheel design, airbag wiring, and possibly the hub interface changed between those generations. Fitting a post-facelift wheel to a pre-facelift car is not straightforward and could affect the airbag system, so you should confirm compatibility with the breaker against both registrations before proceeding.
Does the Nissan 350Z have a steering wheel I can source from a breaker?
Yes, all Nissan 350Z models were rear-wheel-drive coupes fitted with a steering wheel as standard, so this is a genuine part that exists on every variant. Used examples are regularly available through breakers, and the key detail to give them is your registration so they can identify whether your car is pre-facelift (2002–2005) or post-facelift (2006–2009) and match the correct wheel and airbag connector.
Will a Nissan 350Z steering wheel fit with the original airbag still attached?
Some breakers supply the steering wheel complete with the airbag module, but whether the airbag and its connectors are compatible with your specific car depends on the year and specification of both the donor and your vehicle. Airbag systems are safety-critical, so always confirm with the breaker that the complete assembly — wheel, airbag, and clock spring — matches your registration before buying.