Cheap Nissan Primera Brake Master Cylinder
Compare prices on a used Nissan Primera brake master cylinder from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Nissan Primera brake master cylinder
No two brake master cylinders are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State if ABS is fitted
Other used Nissan Primera parts
- Used Nissan Primera Brake Pads
- Used Nissan Primera Power Steering Pump
- Used Nissan Primera Axle
- Used Nissan Primera Steering Box
- Used Nissan Primera Exhaust System
- Used Nissan Primera Front Cross Member
- Used Nissan Primera Seat
- Used Nissan Primera Door Card
- Used Nissan Primera Gearbox
- Used Nissan Primera Crankshaft
- Used Nissan Primera Bonnet Latch
- Used Nissan Primera Air Flow Meter
Used brake master cylinder for other Nissan models
Fitment questions
Does the Nissan Primera actually have a brake master cylinder?
Yes, every Nissan Primera has a brake master cylinder — it is a fundamental hydraulic component present on all variants of the car, regardless of engine size, trim level, or generation. The master cylinder converts pedal pressure into hydraulic pressure that operates the brakes, so no braked road car would be without one.
Will a brake master cylinder from a 1999 Primera fit my 2003 model?
These sit in different generations — the P11 ran from roughly 1996 to 2002, while the P12 ran from 2002 to 2007 — and the two generations are not the same platform, so a P11 master cylinder is very unlikely to be a direct fit on a P12. Confirm the exact part numbers with the breaker against both registrations before buying.
Does engine size affect which brake master cylinder I need on the Primera?
Yes, it can — larger or more powerful engines in the Primera range were typically paired with uprated braking systems, and the master cylinder bore size can differ to suit. When contacting a breaker, give them your registration so they can confirm the correct cylinder size for your specific engine variant.
Does trim level make a difference — will a master cylinder from an S or SE fit my SVE?
Trim level — whether S, SE, or SVE — does not in itself determine which brake master cylinder was fitted; what matters is the generation (P11 or P12) and the engine fitted to the car. Give the breaker your registration and theirs and let them cross-reference the part numbers, as cosmetic trim differences have no bearing on this component.
I have a 2001 P11 Primera — can I use a master cylinder from a P11 facelift model?
The P11 received a facelift during its production run, and while many running-gear components carried over, there is a possibility that brake system specifications were revised at that point. Name the exact year and engine of both vehicles when speaking to the breaker, and ask them to match part numbers rather than assume pre- and post-facelift units are identical.
What should I tell the breaker when I ask for a used Nissan Primera brake master cylinder?
Give them your full registration number, your engine size and code if you know it, and the mileage so they can assess the condition of used units — this lets them identify the correct generation and specification immediately. A reputable breaker will cross-reference the part number against your vehicle rather than simply matching by model name, which is the safest way to avoid buying a cylinder with the wrong bore or port spacing.