Findapart

Cheap Nissan NP300 Steering Wheel

Need a used Nissan NP300 steering wheel? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Nissan NP300 steering wheel

A used steering wheel that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Nissan NP300 parts

Used steering wheel for other Nissan models

Fitment questions

Does a steering wheel from an older NP300 fit a newer one?

The Nissan NP300 Navara (D40) ran from around 2005 to 2015, and the second-generation NP300 Navara (D23) launched in 2015 and is still in production — these are entirely different platforms with different steering columns and wheel fitments, so a wheel from the D40 generation will not cross over to a D23. Within each generation there may be mid-run changes to the airbag system or clock spring that affect compatibility, so confirm exact interchange against your registration with the breaker before buying.

Will any NP300 Navara steering wheel fit regardless of engine — diesel or petrol?

The steering wheel itself is not engine-specific on the NP300 Navara; the same wheel was used across diesel and petrol variants within a given generation. What matters more is the generation (D40 or D23) and whether your vehicle has additional steering wheel controls such as cruise or audio buttons, as these need to match the wheel you are sourcing. Confirm the connector and control layout with the breaker against your registration to make sure you get the right unit.

Does the trim level matter — for example, does a Visia or Acenta wheel fit an N-Guard or Tekna?

On the NP300 Navara, trim level does not affect the fundamental fitment of the steering wheel to the column, so the physical fitting is the same across Visia, Acenta, N-Guard, and Tekna grades. However, higher trims such as Tekna typically have more steering wheel-mounted controls and may have a leather-wrapped rim versus a plain finish on lower trims, so the part you source may look or feel different even if it bolts on. Confirm the button layout and any airbag connector type with the breaker to avoid mismatches in functionality.

Does a 2018 NP300 steering wheel fit a 2016 NP300?

Both a 2016 and a 2018 NP300 Navara fall within the D23 generation, so the steering wheel is likely to be compatible, but there were running changes within the D23 production run that could affect the clock spring, airbag connector, or control wiring. Treat this as a probable rather than guaranteed match and confirm against both registrations with your breaker before purchasing.

Can I use a D40 (pre-2015) NP300 steering wheel in a D23 (2015-onwards) NP300?

No — the D40 and D23 NP300 Navara are completely separate vehicle platforms, and the steering columns, boss fittings, and airbag systems are not shared between them. You must source a steering wheel from the same generation as your vehicle; a D40 wheel will not correctly fit or function in a D23, and vice versa.

I just need a plain used steering wheel to replace a damaged one — do I need to worry about where in the UK the vehicle was dismantled?

The main things to check are generation (D40 or D23), whether your wheel has steering-mounted controls and an airbag, and that the airbag connector type matches — the dismantling yard's location in the UK makes no difference to fitment. Ask the breaker to confirm the part against your registration number, and if the wheel comes with an airbag module, be aware that used airbag components should be inspected carefully before fitting.