Cheap Nissan Navara Bonnet Strut
Need a used Nissan Navara bonnet strut? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Other used Nissan Navara parts
- Used Nissan Navara Front Grille
- Used Nissan Navara Fog Light
- Used Nissan Navara Indicator Light
- Used Nissan Navara Headlight
- Used Nissan Navara AC Compressor
- Used Nissan Navara Exhaust Manifold
- Used Nissan Navara Starter Motor
- Used Nissan Navara Wiper Blades
- Used Nissan Navara Door Lock Mechanism
- Used Nissan Navara Brake Light Switch
- Used Nissan Navara Rear View Mirror
- Used Nissan Navara ABS Pump
Used bonnet strut for other Nissan models
Fitment questions
Does the Nissan Navara actually have bonnet struts, or does it use a bonnet stay rod?
The Nissan Navara does use bonnet gas struts to prop the bonnet open - it does not rely on a simple manual stay rod. This applies across the main UK generations of the Navara, so you are looking for the right part. Make sure you are searching for bonnet struts (also called bonnet gas springs or bonnet supports) when getting quotes from breakers.
Will a bonnet strut from a D40 Navara (2005-2015) fit my D40 Navara?
The D40 generation ran from 2005 to around 2015 in the UK and received a facelift around 2010, which brought changes to the front-end including the grille, headlights, and bumper. Bonnet struts are a front-end component, so the facelift boundary is the key question for interchange - you should confirm with the breaker whether the pre-facelift and post-facelift struts share the same mounting points for your exact registration. Within the same facelift period, fitment should be consistent across the D40 range.
I have a D23 Navara (2016 onwards) - will a strut from an earlier D40 model fit?
The D23 (also known as the NP300 Navara) is a completely different generation from the D40, introduced in the UK around 2016, and the two generations do not share front-end components. You will need a bonnet strut sourced from a D23 Navara specifically. Ask your breaker to confirm the part against your registration to be certain.
Does it matter whether my Navara is a Visia, Acenta, Tekna, or Trek-1° trim when looking for a bonnet strut?
Trim level does not affect bonnet strut fitment - the struts are consistent across Visia, Acenta, Tekna, and Trek-1° within the same generation and facelift period. You may find cosmetic differences in the bonnet or surrounding panels between trims, but the strut itself is not trim-specific. Focus your search on the generation and facelift period rather than the trim name.
Does the engine size or type affect which bonnet strut I need for my Navara?
No - the engine fitted to your Navara does not affect which bonnet strut you need, as the struts are determined by the bodyshell generation rather than the drivetrain. Whether your Navara has the 2.5 dCi or 2.3 dCi diesel, the relevant factor is the generation (D40 or D23) and the facelift period. Always give the breaker your full registration number so they can verify the exact part.
A breaker has a bonnet strut from a 2009 D40 Navara - will it fit my 2012 D40?
This question spans the D40 facelift boundary, which occurred around 2010, meaning a 2009 vehicle is pre-facelift and a 2012 vehicle is post-facelift. Because front-end components can change at a facelift, you should not assume these struts interchange without checking. Confirm the part against your registration directly with the breaker before purchasing, as they will be able to compare the specific mounting points and dimensions.