Nissan Kubistar Washer Pump Replacement Parts

Yes, the Nissan Kubistar is fitted with a windscreen washer pump as standard — it's a small electric pump that sits in the washer fluid reservoir and feeds the front windscreen jets. The Kubistar is a rebadged Renault Kangoo, so the washer pump is a conventional fitment you'd expect on any van of this type. If you're not getting fluid to the screen, the pump is a common failure point worth checking.

The Nissan Kubistar was sold in the UK across two generations based on the Renault Kangoo platform — the first generation ran from around 2003 to 2008, and a facelifted or updated version continued to around 2009 when UK sales ended. The washer pump design may differ between these generations, so you should confirm with the breaker that the pump from the donor vehicle matches your registration before buying. Because the Kubistar shares its platform with the Renault Kangoo, a breaker may also be able to cross-reference compatible Kangoo pumps if Kubistar stock is limited.

No, trim level does not affect washer pump fitment on the Nissan Kubistar — the pump is a mechanical component tied to the vehicle's platform and generation, not to whether your van has extra equipment or a higher spec. Whether your Kubistar is a basic S or a higher SE trim, the reservoir and pump setup is the same. Just match the pump to the correct generation of vehicle and confirm with the breaker against your registration.

No, the engine variant does not affect washer pump fitment — the pump is part of the body and screen-wash system, which is common across the range regardless of whether your Kubistar has the 1.2 petrol, 1.6 petrol, or 1.5 dCi diesel engine. When speaking to a breaker, focus on the generation of the vehicle rather than the engine code. This keeps your search simpler and widens the pool of compatible donor vehicles.

This is very likely to be compatible given that the Kubistar is mechanically a rebadged Renault Kangoo from the same era, but you should confirm with the breaker by checking the part number against your registration rather than assuming it will fit. Breakers who deal in either Kangoo or Kubistar parts are often aware of these cross-references and may hold more Kangoo stock, which could make sourcing easier. Always ask the breaker to verify compatibility before purchasing.

A failed washer pump is a common cause, but it's worth checking the washer fluid level, the condition of the tubing, and whether the jets are blocked before buying a used pump. If the pump makes no noise at all when you press the washer stalk, the pump itself or its wiring is the most likely culprit. When sourcing a used pump from a breaker, confirm it comes from the correct generation of Kubistar or Kangoo and ideally ask whether it was tested as working before removal.