Second Hand Nissan Cabstar Parking Sensor

Parking sensors were not a standard factory-fitted feature on the Nissan Cabstar in any of its generations sold in the UK; the Cabstar is a light commercial truck primarily designed for load carrying rather than passenger-car convenience features. Some operators may have had aftermarket or dealer-fitted parking sensor kits installed, so if a Cabstar you have seen does have sensors, they are almost certainly an aftermarket addition rather than a genuine OEM Nissan part. If you are looking to add parking sensors to your Cabstar, you would be searching for a universal aftermarket kit rather than a model-specific used OEM part from a breaker.

Because parking sensors were not factory-fitted to the Nissan Cabstar as standard equipment, you are unlikely to find a genuine OEM Nissan parking sensor listed by a breaker specifically as a Cabstar part. Any parking sensor fitted to a Cabstar in service will have been an aftermarket universal or van-fit kit, so the part to look for is the specific aftermarket brand or kit rather than a vehicle-specific OEM component. A breaker may occasionally strip a Cabstar that had an aftermarket kit fitted by a previous owner, but this would be coincidental rather than a standard salvage part.

If a breaker is quoting you a parking sensor described as coming from a Nissan Cabstar, it is almost certainly an aftermarket universal-fit sensor rather than a Cabstar-specific OEM part, since Nissan did not factory-fit parking sensors to this model. Compatibility will depend on the sensor diameter, the connector type, and the brand of the kit already on your vehicle rather than on the Cabstar model year or generation. Confirm with the breaker exactly which aftermarket kit the sensor came from so you can match it to what is already installed on your van.

Because parking sensors were never a factory-fitted, generation-specific component on the Nissan Cabstar, the generation of your truck - whether an earlier F23 series or the later Cabstar built on the Renault Maxity platform - does not determine which parking sensor will fit it. Fitment depends entirely on the aftermarket kit specification, including sensor diameter (typically 18mm or 22mm) and the control module it was paired with. Focus on matching the sensor spec and connector to your existing kit rather than matching it by Cabstar generation or year.

A parking sensor from an NV400 or Renault Master would only be relevant if your Cabstar already has an OEM-spec sensor from one of those vehicles retro-fitted to it, which would be unusual. Since Cabstar parking sensors are aftermarket fitments, compatibility is determined by sensor size, colour, and connector type rather than by shared Nissan or Renault platform. If you are unsure what is already fitted to your Cabstar, take the existing sensor to a breaker or auto-electrician to match the specification directly.