Findapart

Used Nissan 350Z Fuel Pump

Get quotes for a used or replacement Nissan 350Z fuel pump. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Nissan 350Z fuel pump

Used fuel pumps vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Nissan 350Z parts

Used fuel pump for other Nissan models

Fitment questions

Does the Nissan 350Z actually have a fuel pump, and will I find one at a breaker?

Yes, all Nissan 350Z models sold in the UK use a petrol engine and have an in-tank electric fuel pump — it's a standard part on every variant. The 350Z was only ever offered with a 3.5-litre V6 petrol engine, so there are no diesel variants to complicate matters. Any UK breaker dismantling a 350Z should be able to supply one.

Will a fuel pump from a 2003-2005 350Z fit my 2006-2009 facelift model?

The Nissan 350Z ran from 2003 to 2009 in the UK, with a notable facelift arriving for the 2006 model year that brought engine and ancillary revisions alongside the styling changes. Because of those mid-life changes, a fuel pump from the pre-facelift (2003–2005) generation is not a guaranteed straight swap into a 2006–2009 car — you should confirm compatibility with the breaker against your specific registration and engine code before purchasing. Supplying your engine code (found on your V5C or via a VIN check) will give the breaker the most reliable basis for matching the part.

Does the trim level affect which fuel pump I need — for example, does a GT or Touring model use a different pump?

Trim level does not affect fuel pump fitment on the 350Z — the pump is determined by the engine, not by whether the car is a standard, GT, or Touring specification. All UK 350Z variants share the same 3.5-litre V6 petrol engine, so trim differences (which relate to interior equipment, sat-nav, and leather seating) are irrelevant here. Focus on the engine code and model year when sourcing a used pump.

My 350Z is a 2007 — what engine code should I quote to the breaker when asking about a fuel pump?

The engine code is the single most useful detail you can give a breaker, as mechanical parts like the fuel pump follow the engine rather than the badge or year alone. For the 350Z the relevant code is typically VQ35DE or VQ35HR (the HR being the revised unit introduced during the facelift period), and these two codes are not identical in their ancillary components. Check your V5C or run a VIN check to confirm which code your car carries before approaching a breaker.

Can I use a fuel pump from a Nissan 350Z if I'm actually repairing a Nissan 370Z or Infiniti G35?

The 370Z uses a different 3.7-litre VQ37VHR engine, so its fuel pump is not the same unit as the 350Z's and the two should not be treated as interchangeable. The Infiniti G35 shares the VQ35 engine family with the 350Z and there may be some overlap, but whether a specific used pump crosses over depends on the exact engine code and model year of both vehicles — confirm this directly with the breaker rather than assuming compatibility. A good breaker will cross-reference both registration numbers to advise you.

Is there anything I need to know about coding or pairing a used fuel pump to my 350Z before I buy?

A replacement fuel pump on the 350Z is generally a mechanical fit rather than an electronically coded component in the way an ECU or key is, but whether any specific used unit requires configuration or works seamlessly with your car's system is something to confirm with the breaker against your registration. It's also worth asking the breaker whether the pump comes with the sender unit and any associated hardware, as these are sometimes supplied together or separately depending on how the car was dismantled. Getting that clarity upfront will save time when the part arrives.