Used Nissan 350Z Brake
Get quotes for a used or replacement Nissan 350Z brake. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Nissan 350Z brake: what matters
Fitment on a used brake varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
- State which brake part you need
- State whether it's front or rear
Other used Nissan 350Z parts
- Used Nissan 350Z Steering Column
- Used Nissan 350Z Shock Absorber
- Used Nissan 350Z Handbrake Cable
- Used Nissan 350Z Brake Master Cylinder
- Used Nissan 350Z Gear Stick
- Used Nissan 350Z Body Control Module
- Used Nissan 350Z Clutch Master Cylinder
- Used Nissan 350Z Inlet Manifold
- Used Nissan 350Z Towbar
- Used Nissan 350Z Wheel Arch Liner
- Used Nissan 350Z Engine Wiring Loom
- Used Nissan 350Z Centre Console
Used brake for other Nissan models
Fitment questions
What years did the Nissan 350Z run, and are the brakes all the same?
The Nissan 350Z was produced from 2002 to 2009 as a single generation, though it received a significant facelift around 2006 that brought revised styling and some mechanical updates. Brakes can vary across the production run, particularly around that 2006 facelift point, so while many components are shared, you should confirm with the breaker that the part they have matches your specific registration rather than assuming any 350Z brake will fit yours.
Will brakes from a pre-facelift 350Z (2002–2005) fit my post-facelift 2007 model?
The 2006 facelift is a known boundary for the 350Z and some brake components may differ across it. Name that boundary to your breaker and ask them to check the part against your registration number, as we cannot guarantee interchange across a facelift change.
Does the engine size affect which brakes the 350Z has?
The 350Z used the 3.5-litre V6 throughout its run, so there is no engine-size variation to worry about here — unlike some ranges where different engines bring different brake setups. That said, there were running changes to brake specifications over the production years, so always have the breaker verify against your reg.
Do the Touring, GT, and Roadster trim levels have different brakes?
Trim level alone — whether Touring, GT, or a similar grade — does not generally affect brake fitment on the 350Z, as brakes on this model were driven by the shared drivetrain rather than trim specification. You may find cosmetic differences such as caliper colour between examples, but the mechanical brake components should be the same; confirm with the breaker if you want to be certain.
Does it matter whether I buy brakes from a coupe or a Roadster 350Z?
Both the coupe and Roadster shared the same 3.5-litre platform and running gear, so brake components are generally compatible across body styles. However, you should still ask the breaker to cross-reference against your registration, as there can be production-run differences unrelated to body style.
I've seen 350Z brakes listed without specifying year — is that a problem?
Yes, it is worth being cautious, because brake specifications on the 350Z did change during its 2002–2009 production run, particularly around the 2006 facelift. Always give the breaker your full registration number so they can confirm the part is from a compatible donor vehicle rather than relying on a generic 350Z listing.