Cheap Mercedes-Benz X-Class Brake Pedal

Yes, every variant of the Mercedes-Benz X-Class (2017–2020) has a brake pedal – it is a standard mechanical component fitted to all versions regardless of engine or drivetrain. Whether you have the 220d, 250d, or 350d, the brake pedal assembly is present, so you can legitimately search for this part from a breaker. Give the breaker your registration so they can confirm the exact specification against your vehicle.

The X-Class ran as a single generation throughout its entire production life from 2017 to 2020 with no facelift or mid-cycle redesign, so there is no generational boundary to worry about. In principle, pedals from early and late production cars should be compatible, but confirm with the breaker against your registration before buying, as minor running changes can occur within a single generation.

The brake pedal box and pedal assembly itself is generally the same across the X-Class range, though the braking system behind it does vary with engine output – the 350d with its higher power and weight rating carries larger brake components than the 220d. The pedal itself is unlikely to differ, but tell the breaker your engine variant so they can match everything correctly and flag any differences they are aware of.

Trim level – whether Pure, Progressive, or Power – does not affect brake pedal fitment on the X-Class; the pedal is a mechanical running-gear component, not a cosmetic one. You may find that Power trim cars sourced from a breaker have a slightly different pedal finish or rubber, but the underlying assembly should be interchangeable. Confirm with the breaker against your registration to be certain.

The X-Class shares its ladder-frame platform and some underpinnings with the Nissan Navara (NP300 generation), so there is some parts commonality between the two. However, Mercedes-Benz made changes to the X-Class chassis and controls, and the brake pedal assembly may not be a straight swap. Do not assume compatibility – check with your breaker, who may be able to cross-reference part numbers for both vehicles.

Give the breaker your full registration number, which lets them pull the exact build specification from the DVLA and manufacturer data. It is also worth telling them your engine variant (220d, 250d, or 350d) and whether your vehicle is two-wheel drive or four-wheel drive, as these factors influence the wider braking setup even if the pedal itself is the same. Having this information ready will help the breaker confirm fitment and source the right part quickly.