Cheap Mazda Premacy Brake Pedal

Yes, all variants of the Mazda Premacy are fitted with a brake pedal as standard — this is a fundamental pedal box component present on every Premacy regardless of engine size or trim level. The Premacy was sold in the UK as a compact MPV and all versions used a conventional hydraulic braking system operated by a foot-operated brake pedal. Whether your car is a manual or automatic, the brake pedal will be present, though the pedal box assembly may differ slightly between the two transmission types, so confirm with the breaker which gearbox your car has.

The Mazda Premacy was sold in the UK across two main generations: the first generation (CP series) ran from approximately 1999 to 2005, and the second generation (CR series) ran from approximately 2005 onwards into the early 2010s. These two generations are built on different platforms with different pedal box designs, so a brake pedal from a first-generation CP Premacy is very unlikely to interchange with a second-generation CR model. Always tell the breaker which generation your car belongs to — ideally confirm via your registration — before agreeing a sale.

For the brake pedal itself, engine size is unlikely to be the primary fitment factor on the Premacy, as the pedal is part of the pedal box assembly rather than directly linked to brake servo or caliper sizing. However, different engine variants may have been paired with different brake servo or master cylinder setups, which could in turn affect pedal compatibility, so it is worth confirming the engine size on your car with the breaker. Stick within the same generation and the same broad engine family where possible to give yourself the best chance of a straight swap.

Automatic and manual Premacys can have differently configured pedal boxes because the manual version has a clutch pedal alongside the brake pedal, meaning the pedal positioning and bracket geometry may differ. The brake pedal itself may share some dimensions, but the mounting arrangement in an automatic versus a manual pedal box is often not interchangeable. Tell the breaker clearly whether your car is an automatic or manual so they can supply the correct part from a matching car.

Trim level does not affect brake pedal fitment on the Premacy — the braking system and pedal assembly are determined by the generation, platform, and drivetrain type rather than whether the car is a base or higher specification model. You may find minor cosmetic differences such as a rubber pad or pedal cover that varies between trims, but the underlying pedal and bracket should be the same within the same generation and transmission type. Focus on matching the generation and gearbox type rather than worrying about trim designation when speaking to a breaker.

A 2004 Premacy falls within the first-generation CP series, while a 2007 model sits in the second-generation CR series, meaning these two cars are from entirely different platforms and the brake pedal is very unlikely to be a direct fit. The pedal box design, mounting points, and associated master cylinder connections will differ between these generations. Confirm the exact generation and transmission type of your car with the breaker before purchasing, and source the pedal from a matching-generation donor vehicle.