Second Hand Mazda 6 Handbrake Lever
Compare prices on a used Mazda 6 handbrake lever from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
What to check when buying a used Mazda 6 handbrake lever
A used handbrake lever that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
- State whether it's a manual lever, foot pedal or electronic
Other used Mazda 6 parts
- Used Mazda 6 Sun Visor
- Used Mazda 6 Heater Matrix
- Used Mazda 6 Curtain Airbag
- Used Mazda 6 Steering Wheel Airbag
- Used Mazda 6 Brake Master Cylinder
- Used Mazda 6 Engine
- Used Mazda 6 Battery
- Used Mazda 6 Window Regulator
- Used Mazda 6 Heater Motor
- Used Mazda 6 Radiator Fan
- Used Mazda 6 Fuel Injection Pump
- Used Mazda 6 Clutch Slave Cylinder
Used handbrake lever for other Mazda models
Fitment questions
Does the Mazda 6 actually have a traditional handbrake lever, or is it electronic?
This depends on the generation: the first-generation Mazda 6 (GG/GY, 2002–2007) and second-generation (GH, 2008–2012) both used a conventional mechanical handbrake lever mounted between the front seats. The third-generation Mazda 6 (GJ, 2013 onwards) switched to an electric parking brake, so there is no physical handbrake lever to source for those cars. If your Mazda 6 is a 2013 or newer, you'll need to look for an electric parking brake switch rather than a lever.
Will a handbrake lever from a 2005 Mazda 6 fit my 2009 Mazda 6?
These belong to different generations — the 2005 car is first-gen (GG, 2002–2007) and the 2009 car is second-gen (GH, 2008–2012) — so the levers are not the same and will not interchange directly. Stick to sourcing a lever from within the correct generation for your car, and confirm the exact part reference with the breaker against your registration to be sure.
Does the trim level affect which handbrake lever I need for a first or second-gen Mazda 6?
For the mechanical handbrake lever itself, the trim level is unlikely to affect fitment, as the lever assembly is the same across the range within a generation. However, the gaiter or cover surround the lever sits in may differ in material or finish between trims like S, TS, TS2, and Sport, so be aware you may see minor cosmetic differences if the breaker supplies the lever with its boot attached. Confirm the exact setup with the breaker if appearance matters to you.
Does the engine size or type matter when buying a used Mazda 6 handbrake lever?
No — whether your Mazda 6 has a 1.8, 2.0, 2.2 diesel, or any other engine, the handbrake lever is the same within a generation, so engine spec makes no difference to fitment. Just make sure you match the correct generation (first-gen GG 2002–2007, or second-gen GH 2008–2012) and confirm with the breaker against your registration.
Will a handbrake lever from a Mazda 6 estate fit my Mazda 6 saloon?
The handbrake lever itself sits in the interior cabin and is generally the same part regardless of body style — saloon, hatchback, or estate — within the same generation. That said, surrounding trim pieces and centre console panels can differ between body styles, so check with the breaker whether the lever is being supplied with any console surround, to avoid ending up with parts that don't match your interior.
My Mazda 6 is a 2007 — is that first-gen or second-gen, and what handbrake lever do I need?
A 2007 Mazda 6 sits right at the end of the first generation (GG/GY, 2002–2007), just before the second generation (GH) arrived for the 2008 model year. You should be looking for a first-gen lever, but because 2007 is a changeover year, it's worth confirming with the breaker using your exact registration to make sure you get the right part.